Boxerworks.com

My biggest question is whether that 16.7v reading at B+ is way off. Anything i've read says it should be 13.5 -14.2v. Does this indicate a bad board?

as far as resoldering the board, how does one get through that gray paint or whatever it is on the board? I have another board, actually two if i count the parts bike, and I will try those if I need to . And yes, I was clamped to the terminals and the Voltmeter had stabilized at the listed values. I...

Hello gentlemen, Long time, no post. it's been an interesting few years, had bypass surgery, got married, had a decent business that is struggling due to overall conditions, but I'm happy and I have a rebuilt heart that should last a while longer. But anyhow, i have been trying to get the bike ('78 ...

Definately used crush washers on he bottoms of the threaded plug and that isn't leaking. The oil is coming from the large nut that threads into the slider. Clymer says to not even use crush washers there, even though I did use the new copper ones I had in stock. I did clean the threads but used no s...

Hey guys, Been a long time, but after some health problems and work goofiness and a marriage proposal I am trying to get the bike back on the road. Anyhow, '78 R100/7 I had to pull the sliders to set the new dual disc one and I cannot get the large nut on the bottom of each to stop leaking. i used c...