Spyed on a photo of a 94 R100 for sale here in OZ a kickstart lever ,I know that the last of airheads were a bit of a parts-bin special but would they of dug this deep in the bin when my bike a 95R100 has starter-motor only or has it another box fitted?
Cheers mitch
Search found 8 matches
- Tue Nov 15, 2011 10:07 pm
- Forum: Post 1970 Airheads
- Topic: kick start
- Replies: 2
- Views: 744
- Thu Apr 21, 2011 7:28 pm
- Forum: Post 1970 Airheads
- Topic: Which pistons should I look for?
- Replies: 6
- Views: 1800
Re: Which pistons should I look for?
My 95 R100 had 8.5 comp standard pistons I installed a 336 cam a while back which is a great cam but realy shines from about 5500 to 7700 rpm,I rarely use those revs anymore so I put back the standard 308 cam and bought a pair of 9.5 comp high performance Wossner pistons from motoren-israel there li...
- Thu Mar 17, 2011 7:29 pm
- Forum: Post 1970 Airheads
- Topic: NASTY SURPRISE
- Replies: 13
- Views: 3914
NASTY SURPRISE
The sump on my 95 R100 loked a bit damp so I thought I would change the gasket,on dropping the sump I found a small pin about 1/2" long by 1/16', on reaching for my Haynes I saw it was the locating pin for the front bearing.I have,nt had the sump off for about 4 years and never had the front be...
- Thu Jan 27, 2011 4:38 am
- Forum: Post 1970 Airheads
- Topic: push-rod tubes
- Replies: 3
- Views: 1194
push-rod tubes
Whats the best or only way to remove push-rod tubes from the barrel ?
mitch.
mitch.
- Sun Jan 02, 2011 8:26 pm
- Forum: Post 1970 Airheads
- Topic: head change
- Replies: 8
- Views: 2349
Re: head change
A wealth of information thanks a lot!
- Sat Jan 01, 2011 8:49 pm
- Forum: Post 1970 Airheads
- Topic: head change
- Replies: 8
- Views: 2349
Re: head change
40mm on mine
- Sat Jan 01, 2011 3:42 pm
- Forum: Post 1970 Airheads
- Topic: head change
- Replies: 8
- Views: 2349
Re: head change
I should of said the bike will be used for touring so I will try it leaving the 336 in with the smaller valves and the standard 40mm bings.When the pistons arrive whats a good way of measuring the depth of the valve cut-outs against the standard BM piston,I want to measure off the gudgeon pin (wrist...
- Fri Dec 31, 2010 11:11 pm
- Forum: Post 1970 Airheads
- Topic: head change
- Replies: 8
- Views: 2349
head change
On my 95 R100 Ive fitted a 336 cam and nice extracter and sports muffler in place of the standard collector box,anyway its goes well strong from 4000 thou up.But now Ive got a pair of earlier heads with 44mm inlet valves(mine are 42mm)Im thinking of trying them on but first I,ll put back the stanard...