kick start lever

Discuss all things 1970 & later Airheads right here.
Post Reply
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

kick start lever

Post by Zombie Master »

84 R100

Do I need to remove the kick start lever to remove the transmission?
Any and all disclaimers may apply
User avatar
jagarra
Posts: 896
Joined: Mon Dec 26, 2011 12:42 pm
Location: Reno, Nevada

Re: kick start lever

Post by jagarra »

I didn't on my 74, handy place to grab it when you are wrestling it out of the frame.
1974 R90/6 built 9/73
1987 BMW K75S
1994 BMW R1100RS
1964 T100SR Triumph
1986 Honda XL600R
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: kick start lever

Post by Zombie Master »

Thanx!
Any and all disclaimers may apply
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: kick start lever

Post by SteveD »

Waddya gunna do to the trans?
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: kick start lever

Post by Zombie Master »

SteveD wrote: Thu Apr 13, 2017 6:32 pm Waddya gunna do to the trans?
Clean up and spline lube.
Any and all disclaimers may apply
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: kick start lever

Post by SteveD »

Zombie Master wrote: Fri Apr 14, 2017 4:04 am
SteveD wrote: Thu Apr 13, 2017 6:32 pm Waddya gunna do to the trans?
Clean up and spline lube.
Outside clean or inside renovation?
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: kick start lever

Post by Zombie Master »

Just an external clean up and spline lube. I made up a concoction 25 years ago for the input shaft spline. I want to see how well the splines held up. I'll post a pic when I finally pull it out. I've been very slow to get this done! But it's not my only ride.
Any and all disclaimers may apply
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: kick start lever

Post by SteveD »

25 years! If they're good, it'll be nice evidence to not do them too often.

Mine was done about 100Kkm back. I'm waiting for a clutch, RMS or other problem to do them again.
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Post Reply