Your opinions please

Discuss all things 1970 & later Airheads right here.
User avatar
jagarra
Posts: 896
Joined: Mon Dec 26, 2011 12:42 pm
Location: Reno, Nevada

Re: Your opinions please

Post by jagarra »

I made my own alignment tool, mine needed a pin as the part that went into the end of the crank, not sure why but here is what worked.
Image

I have made them using deep well sockets or what else I could find, biggest issue is to figure out how to get the center piece centered.
1974 R90/6 built 9/73
1987 BMW K75S
1994 BMW R1100RS
1964 T100SR Triumph
1986 Honda XL600R
User avatar
Ken in Oklahoma
Posts: 3182
Joined: Tue Aug 03, 2010 5:10 pm

Re: Your opinions please

Post by Ken in Oklahoma »

SteveD wrote: Mon Apr 24, 2017 3:31 am Would a tool turned from hardwood work?
That'd be easy and cheap.


Image
I have done just that, machined a tool from hardwood in a small 6" Craftsman metal lathe. It worked great.

I would use the densest least porous, finest grained hardwood you can find (such as a lot of 'tropical' hardwoods). Something like Oak would be a wood that I would not use, despite it being heavy. (But having said that, it would probably work.)

Ken
____________________________________
There's no such thing as too many airheads
User avatar
jagarra
Posts: 896
Joined: Mon Dec 26, 2011 12:42 pm
Location: Reno, Nevada

Re: Your opinions please

Post by jagarra »

Wood will work OK, I have a few alignment tools that were made for autos that were originally made out of wood, they even have Ford or Chevy stamped on the side.
1974 R90/6 built 9/73
1987 BMW K75S
1994 BMW R1100RS
1964 T100SR Triumph
1986 Honda XL600R
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Your opinions please

Post by SteveD »

Clever by Melville :!:
Image
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Chuey
Posts: 7632
Joined: Mon Aug 02, 2010 11:56 pm

Re: Your opinions please

Post by Chuey »

melville wrote: Mon Apr 24, 2017 7:34 am Here's the homebrew clutch centering tool I made a few years ago:
I was disappointed you had not buffed the tool. :)

Chuey
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Your opinions please

Post by Zombie Master »

I've got the trans back in. No leaks down under.
Any and all disclaimers may apply
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Your opinions please

Post by SteveD »

Zombie Master wrote: Wed Apr 26, 2017 2:08 am No leaks down under.
You didn't see my shed after last nights deluge. :(
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Zombie Master
Posts: 8821
Joined: Sun Aug 22, 2010 12:21 am
Location: Vancouver Island BC Canada

Re: Your opinions please

Post by Zombie Master »

SteveD wrote: Wed Apr 26, 2017 3:58 am
Zombie Master wrote: Wed Apr 26, 2017 2:08 am No leaks down under.
You didn't see my shed after last nights deluge. :(
Will there be poisonous snakes in that water?
Any and all disclaimers may apply
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Your opinions please

Post by SteveD »

Zombie Master wrote: Wed Apr 26, 2017 7:17 pm
SteveD wrote: Wed Apr 26, 2017 3:58 am
Zombie Master wrote: Wed Apr 26, 2017 2:08 am No leaks down under.
You didn't see my shed after last nights deluge. :(
Will there be poisonous snakes in that water?
No snakes seen but I almost walked face first into this critter and it's web. I stopped about 6 inches short of it!
https://youtu.be/IP_GHHqvubQ
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Airbear
Posts: 2887
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Your opinions please

Post by Airbear »

Nah, that's a Garden Orb Weaving Spider you are torturing there. Quite benign if you don't go harassing them. They have very beautiful webs.

https://australianmuseum.net.au/garden- ... ng-spiders

Here's the White Tail:

https://en.wikipedia.org/wiki/White-tailed_spider

They've got a bad reputation for causing necrosis etc, largely unsupported by science. Their bite can be painful but is usually gone by the next day. Their aggressive behaviour ( I had one leap about a foot to bite me on the leg) marks them as viable targets in my house - they are the only spiders I kill rather than share with or relocate. If you are bitten by one get some Betadine antiseptic on it and watch for any change indicating infection. This advice is from the Poisons Info mob.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
Post Reply