Axel nut

[Zombie Master]

1984 R100
At one point I shimmed the wheel to the left to make space for a larger tire.

Now I am changing back to standard (400.- 18) tires. When I shimmed the wheel many years ago, I noticed that there were less threads visible exiting the axle nut. So I safety wired the nut. Would this weaken the nut enough that I should change it to a new nut? Is the nut compromised?

Thanx!

Screen Shot 2022-06-15 at 12.34.03 AM.png (810.26 KiB) Viewed 415 times

[Rob Frankham]

I doubt very much that your hole will have compromised the nut to any significant degree... however... if you're in any doubt, a new nut is not going to break the bank...

Rob

[gspd]

Is the nut compromised?

Worse case scenario, it's now slightly cosmetically compromised.