Has anyone a photo of the Krauser S Set (die cast aluminium) blinker mounts. Just the small tube thingy that inserts into the blinker. See what I'm talking about below.
I've lost my originals and I'd like to make up a new set. Some scale would be appreciated.
hi steve, just had a look at my spare set of krauser frames , but sorry those parts arnt on it , just the long arm that the blinkers go through. if you ever need a set you can have them.
If it turns out that you have to fabricate the turn signal stalk, I can tell you that the tubing used for the BMW fork mounted turn signal stalks (and the tubing used other places) will tap nicely with a 1/2" x 20 TPI tap. Modify a bolt by drilling a hole through the center for the wires and you've got a mount of sorts. And you've already got the notches for the turn signal housing.
Also, light fixtures use 1/2 x 20 TPI hollow threaded rod for holding light globes and other applications. Fabrication potential is there too.
Ken
____________________________________
There's no such thing as too many airheads
