Pesky duplex timing chain clip

mattcfish · Post by **mattcfish** » Tue Mar 01, 2011 3:58 pm

I've installed duplex timing chains twice before and got the clip for the master link in relatively easily. I must have been lucky because it's not so easy this time.
Last night I spent more time looking for the dropped clip than actually attempting to get it on the chain. Maybe it was the cold hands and lack of sleep, but I had to call it quits without finishing the job.
I'll try again tonight with grease and magnets. Anybody want to share their secrets for getting these things in place?

I don't want to hear about simplex chains. Those are way easier because the clip is on the front side of the chain.

Garnet · Post by **Garnet** » Tue Mar 01, 2011 4:21 pm

It's a Zen thing.

The last two chains I've done have had TWO freaken little circlips, just to make it extra hard. Sometimes they just go click, sometimes they just disapear.

You did the right thing, try a few times and then walk away and do something else and try again later.

dougie · Post by **dougie** » Tue Mar 01, 2011 4:45 pm

mattcfish wrote:I'll try again tonight with grease and magnets. Anybody want to share their secrets for getting these things in place?

Can't help Matt. Grease and magnets tells me you are way trickier than me.

Airbear · Post by **Airbear** » Tue Mar 01, 2011 9:14 pm

Haemostats (Hemostats, Roachclip) made the job very quick for me.

Post by **dwerbil** » Tue Mar 01, 2011 10:46 pm

Airbear wrote:Haemostats (Hemostats, Roachclip) made the job very quick for me.

Yes, YES!! The perfect tool for the that dreaded clip.

mattcfish · Post by **mattcfish** » Wed Mar 02, 2011 12:03 am

dwerbil wrote:
Airbear wrote:Haemostats (Hemostats, Roachclip) made the job very quick for me.
Yes, YES!! The perfect tool for the that dreaded clip.

Come to think of it, I think that's what I used before. Now if I could only figure out where they are.

ME 109 · Post by **ME 109** » Wed Mar 02, 2011 12:31 am

dwerbil wrote:Yes, YES!! The perfect tool for the that dreaded clip.

Careful when using them for roaches tho'
Ya don't wanna choke that roach!

SteveD · Post by **SteveD** » Wed Mar 02, 2011 2:49 am

Hmm...I'm seeing a small market in used artery forceps opening up here!

Place your orders, if you want one, used of course and designed for single clinical use only. I'll even clean the protein off!

No guarantee on when one is available, but they will be occasionally and for the price of P&P ....

mattcfish · Post by **mattcfish** » Fri Mar 04, 2011 1:37 am

mattcfish wrote:
dwerbil wrote:
Airbear wrote:Haemostats (Hemostats, Roachclip) made the job very quick for me.
Yes, YES!! The perfect tool for the that dreaded clip.

Come to think of it, I think that's what I used before. Now if I could only figure out where they are.

Got it in! The real problem was that I was using the wrong master link. The one I was using was a Mercedes link I had ordered a long time ago. The link that came with the airhead chain was still in the box. It had slightly longer posts that allowed the keeper grooves to be exposed. The Mercedes link was a hair short on the posts. No matter how I pushed the master clip would not go over the ends....instead it would go flying across the room. I found that using hemostats and dipping the clip in heavy grease simplified the job even more. The grease makes the clip stick to things, so if you drop it it doesn't go far.

Deleted User 287 · Post by **Deleted User 287** » Fri Mar 04, 2011 1:50 am

Amazing.

If I had ordered a master link for something a long time ago, I would never be able to find it, much less let it confuse me!

Boxerworks.com

Pesky duplex timing chain clip

Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip

Re: Pesky duplex timing chain clip