/5 &/6 Alloy shockie Sleeves

[boxertwinjeff]

I would really like a pair of those Polished Alloy Sleeves with the 3 grooves on them
to go on my new Ikon shocks, though it appears they are only for /6 models & the R90S.
Is that right? Did they come standard on those models?, and can you get them for /5s,
their a nice subtle touch of Bling.

337611_1.jpg (128.12 KiB) Viewed 1187 times

[DanielMc]

Motorworks do a stainless copy specifically for Ikons:

http://www.motorworks.co.uk/bmw/product ... xt_image=0

[mattcfish]

Motorworks do a stainless copy specifically for Ikons:

http://www.motorworks.co.uk/bmw/product ... xt_image=0

I used to get stuff from Motorworks before they stopped shipping to the US.

[chasbmw]

To fit Ilona you need to enlarge the hole in the cover to fit, so normal SS ones can be made to fit

[2valve]

hi to all. boxertwinjeff, i had a set made up to suit my konis when i built the bike , but mine are made out of marine grade alloy. by memory the origianl bmw sleeves off the shocks did not fit over the konis ( id of the shrouds was to small to fit over the koni springs ) . also by memory it didnt cost much to get made plus there still alloy as oe on the bike. well thats my two cents worth