Disc type breather to reed valve conversion
Re: Disc type breather to reed valve conversion
Boertjie, getting back to your original post, excessive oil in the airbox is not necessarily a failure of the breather. It can also mean your piston rings are worn and causing excessive crankcase pressure.
Re: Disc type breather to reed valve conversion
Hi Tim, yes I agree. Piston rings were also on my shopping list at Motobins and I am busy with the honing of the cylinders. The leak down test also test positive for bad rings and the compression test showing different figures for both sides.
Regards Boertjie
Regards Boertjie
Re: Disc type breather to reed valve conversion
Sounds like you have all the bases covered.
Re: Disc type breather to reed valve conversion
Sure hope so my friend...Tim Shepherd wrote:Sounds like you have all the bases covered.