1. Is it OK on a cold morning and worse when hot?
2. How did you measure the end play of the input shaft?
You have described the classic case of a grabby clutch due to excessive end play of the input shaft.
This info is available on my website.
r65 fierce clutch
-
- Posts: 6008
- Joined: Thu Aug 12, 2010 12:39 pm
- Location: Galt California
- Contact:
Re: r65 fierce clutch
Ask the Indians what happens when you don't control immigration.
-
- Posts: 33
- Joined: Sun Aug 22, 2010 4:42 pm
Re: r65 fierce clutch
its the same hot or cold .
input shaft end play as per your site , first thing I looked for .
I shimmed it too tight at first to really see if this was the fault .
regards JIM
input shaft end play as per your site , first thing I looked for .
I shimmed it too tight at first to really see if this was the fault .
regards JIM