choosing proper electrical relays

Discuss all things 1970 & later Airheads right here.
Post Reply
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

choosing proper electrical relays

Post by twist »

After reading about using electrical relays for horns and lights and other stuff, I have to ask what amperage is best suited for the boxer system? I don't know where to begin picking the right part. :?: Is there a rule of thumb for choosing electrical parts?
Garnet
Posts: 3108
Joined: Tue Aug 03, 2010 6:24 pm
Location: Victoria BC Canada

Re: choosing proper electrical relays

Post by Garnet »

The small Bosch (or equivilant) 30 amp 5 pin relay is avaialble at most auto parts stores fro 6 or 7 bucks.

http://www.bughaus.com/relay_0332019150.htm
Garnet

Image
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: choosing proper electrical relays

Post by twist »

great! Perfect for duel horn installation. Thanks!
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: choosing proper electrical relays

Post by twist »

since I know little about relays I have to ask: do I need separate relays for every device? For example, can I use the same relay for duel horn and heated grips? Seems like having a relay for each electrical use could get busy and messy. :?
User avatar
melville
Posts: 1822
Joined: Tue Aug 03, 2010 8:32 am

Re: choosing proper electrical relays

Post by melville »

twist wrote:since I know little about relays I have to ask: do I need separate relays for every device? For example, can I use the same relay for duel horn and heated grips? Seems like having a relay for each electrical use could get busy and messy. :?
So when we hear your horn blaring we'll know that you are running your heated grips?

Plenty of room--here are, from left to right (front to back) Horn, Dimmer, and Starter:

Image
Call me Mel. Some years ago- never mind how long precisely- having little or no money in my purse, and nothing particular to interest me at home, I thought I would ride about a little and see the other parts of the world.
dwerbil
Moderator
Posts: 2872
Joined: Tue Aug 03, 2010 10:58 am
Location: Round Rock, Texas
Contact:

Re: choosing proper electrical relays

Post by dwerbil »

melville wrote:
twist wrote:since I know little about relays I have to ask: do I need separate relays for every device? For example, can I use the same relay for duel horn and heated grips? Seems like having a relay for each electrical use could get busy and messy. :?
So when we hear your horn blaring we'll know that you are running your heated grips?

Plenty of room--here are, from left to right (front to back) Horn, Dimmer, and Starter:

Image
Mel, that's about as clean as clean can get. Sure makes it easy to troubleshoot/diagnose when things are
spiffy as that.
Image

Click for pics
04 R1150RT ~ 78 R100/7 ~ 84 RS ~ 93 K1100RS ~ 65 R60/2
Randy in Round Rock
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: choosing proper electrical relays

Post by twist »

I'd rather ask a dumb question and seem stupid than to do something stupid and be really dumb. thanks! Some one here said something like, think of relays as satellites. So I had to ask. I'm still not 100% clear on what relays do and why they're used.
dwerbil
Moderator
Posts: 2872
Joined: Tue Aug 03, 2010 10:58 am
Location: Round Rock, Texas
Contact:

Re: choosing proper electrical relays

Post by dwerbil »

twist wrote:I'd rather ask a dumb question and seem stupid than to do something stupid and be really dumb. thanks! Some one here said something like, think of relays as satellites. So I had to ask. I'm still not 100% clear on what relays do and why they're used.

Hey twist, for starters, er relays, here's a bit from Wiki on the subject....

A relay is an electrically operated switch. Many relays use an electromagnet to operate a switching mechanism mechanically, but other operating principles are also used. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits, repeating the signal coming in from one circuit and re-transmitting it to another. Relays were used extensively in telephone exchanges and early computers to perform logical operations.

A type of relay that can handle the high power required to directly control an electric motor is called a contactor. Solid-state relays control power circuits with no moving parts, instead using a semiconductor device to perform switching. Relays with calibrated operating characteristics and sometimes multiple operating coils are used to protect electrical circuits from overload or faults; in modern electric power systems these functions are performed by digital instruments still called "protective relays".
Image

Click for pics
04 R1150RT ~ 78 R100/7 ~ 84 RS ~ 93 K1100RS ~ 65 R60/2
Randy in Round Rock
User avatar
George Ryals
Posts: 510
Joined: Tue Aug 03, 2010 10:22 am
Location: Stone Mountain, GA

Re: choosing proper electrical relays

Post by George Ryals »

Smile it's contagious!
'74 R90S, '67 /2 Conv w/sc, '66 R50/2
'74 Harley FXE, '72 Harley FLH w/HD sc
'69 BSA 441 Victor Special, '74 R90/6 Basket case
'85 R80RT wreck for parts
User avatar
twist
Posts: 249
Joined: Sun Jan 16, 2011 9:09 pm

Re: choosing proper electrical relays

Post by twist »

great, thanks! I'm a member and never noticed the relay faq and answers. (I must need new glasses)
Post Reply