Torque settings from BMW for airheads.

Discuss all things 1970 & later Airheads right here.
Post Reply
Roy Gavin
Posts: 400
Joined: Tue Aug 03, 2010 11:21 pm
Location: Adelaide Australia

Re: Torque settings for airheads.

Post by Roy Gavin »

There is a version of the Honda Common Service Manual out there somewhere which has the best fasteners 1.01 I have seen , including torque values for most sizes, wet and dry, etc.
Adelaide, Oz. 77 R75/7. 86 R80 G/S PD, 93 R100 GS, 70 BSA B44 VS ,BMW F650 Classic
Top
Roy Gavin
Posts: 400
Joined: Tue Aug 03, 2010 11:21 pm
Location: Adelaide Australia

Re: Torque settings for airheads.

Post by Roy Gavin »

http://www.vf750fd.com/vf750f/Honda_Com ... Manual.pdf

Link to the old 88 manual with the fastener 101, and a lot of good general wrenching information too.
Adelaide, Oz. 77 R75/7. 86 R80 G/S PD, 93 R100 GS, 70 BSA B44 VS ,BMW F650 Classic
Top
Post Reply

Return to “Post 1970 Airheads”