Page 2 of 4
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 4:55 pm
by Steve in Golden
Mr. Melville wrote:I need to see the audiologist to get proper fitted plugs that will clear my helmet. I use the Chinese Tool Store foamies for any trip involving more than 5 miles of freeway in the Kombi, but they stick out enough that they get dislodged putting the helmet on.
You have to wear earplugs in the Kombi?
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 4:57 pm
by Steve in Golden
Zombie Master wrote:What is a "Chinese Tool Store"?
Harbor Freight?
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 5:01 pm
by melville
Steve in Golden wrote:Mr. Melville wrote:I need to see the audiologist to get proper fitted plugs that will clear my helmet. I use the Chinese Tool Store foamies for any trip involving more than 5 miles of freeway in the Kombi, but they stick out enough that they get dislodged putting the helmet on.
You have to wear earplugs in the Kombi?
No headliner except for the cab section. That, and I think the trans is a big contributor these days. The modest whine it had when we got it now has an angry overtone.
Chinese tool store is Harbor Freight, ZM.
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 7:27 pm
by Sibbo
My plugs crush up well enough to fit right inside my ear but I'm still trying to work out how to wear the set of Sony noise cancelling plugs I bought . They really do stick out too far.
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 9:31 pm
by Deleted User 287
You want to pull up on the top-rear of your ear while inserting the rolled-up foam plug.
As per this PDF:
http://www.dadepaper.com/Content/Produc ... 3ac61a.pdf
I won't even put my helmet on without my earplugs. The snapping of the latches on the chin piece hurts my ears!
I think when it comes to wind noise, the old adage applies:
Unsafe at any speed.
Well, not bicycling.
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 10:16 pm
by ME 109
Sibbo wrote:They really do stick out too far.
You could glue your ears back to your head if you're embarrassed about your ears sticking out.
A rubber band around your head will also hold them back.
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 11:37 pm
by Major Softie
ME 109 wrote:Sibbo wrote:They really do stick out too far.
You could glue your ears back to your head if you're embarrassed about your ears sticking out.
A rubber band around your head will also hold them back.
They have surgery too.
Re: An article on helmet noise and hearing .
Posted: Fri Jul 12, 2013 11:41 pm
by ME 109
Major Softie wrote:ME 109 wrote:Sibbo wrote:They really do stick out too far.
You could glue your ears back to your head if you're embarrassed about your ears sticking out.
A rubber band around your head will also hold them back.
They have surgery too.
Surgery: $10,000 (pair)
My ideas: basically
worthless priceless free, basically.
Re: An article on helmet noise and hearing .
Posted: Sat Jul 13, 2013 12:12 am
by Sibbo
ME 109 wrote:Sibbo wrote:They really do stick out too far.
You could glue your ears back to your head if you're embarrassed about your ears sticking out.
A rubber band around your head will also hold them back.
Cheeses ! Ya gotta be careful around here !
Re: An article on helmet noise and hearing .
Posted: Tue Jul 16, 2013 8:14 pm
by Airbear
I am using a Nolan N102 modular helmet. It is comfortable, dry and unfoggable with the Pinlock 'double glazing'. But it is noisy and I simply cannot have anything in my ears. At speed, if I turn my head to the right or left by about 10 degrees the wind noise goes away almost completely, and this has got me wondering if helmet designers bother to test for noise in a wind-tunnel. I can also stick a finger up against the helmet just behind my left ear and create almost complete silence. I think I need to do some experimenting - perhaps taping different shaped lumps to the outside of the helmet and hearing how that works. Helmets should be quieter, and I'm sure it's a design thing.