Parts Source

Discuss all things 1970 & later Airheads right here.
Jean
Posts: 1100
Joined: Wed Aug 18, 2010 7:43 am

Re: Parts Source

Post by Jean »

I was going to give you a link to /5United, but their website seems to be out of service.
anyone know what happened?
Clemson, SC
R100s, R75/5
Kurt in S.A.
Posts: 1652
Joined: Tue Aug 03, 2010 12:08 pm

Re: Parts Source

Post by Kurt in S.A. »

This link?

http://5united.org/

Works fine for me. They did go through a reorganization this year and got an email from the website manager of the change.

Kurt in S.A.
Jean
Posts: 1100
Joined: Wed Aug 18, 2010 7:43 am

Re: Parts Source

Post by Jean »

Kurt...my address was for the (dot). net.
The .org works!
Clemson, SC
R100s, R75/5
boocephus
Posts: 52
Joined: Thu Jul 11, 2013 1:58 pm

Re: Parts Source

Post by boocephus »

What does shipping end up being for MotoBins?

I just spec'd an order at motobins and Hucky's. Hucky's is $15 more. $75 vs $90 with shipping not calculated yet.

I got all the way to entering credit card info and Motobins still doesn't seem to have stated the shipping charge.
Deleted User 62

Re: Parts Source

Post by Deleted User 62 »

Also, these guys are worth a look see. Free shipping for anything over $25 : http://www.EUBMW.com
User avatar
StephenB
Posts: 326
Joined: Tue Aug 03, 2010 2:39 pm
Location: Ontario Canada
Contact:

Re: Parts Source

Post by StephenB »

boocephus wrote:What does shipping end up being for MotoBins?

I just spec'd an order at motobins and Hucky's. Hucky's is $15 more. $75 vs $90 with shipping not calculated yet.

I got all the way to entering credit card info and Motobins still doesn't seem to have stated the shipping charge.
Motonbins is expecting you to put the order through and pay for it using the checkout. Consider it an authorization only as they will email the exact shipping charge and ask you whether you want to proceed with the order or cancel (e.g. you don't like the shipping cost). There is no risk, they will not charge your card unless you authorized the shipping cost. It takes them a day or two to get you the shipping charge. They are very reliable and quality of service is excellent.

Not associated with them whatsoever just a happy customer.
Some of the above is fact, some is fiction, some is my personal imagination and some is just simple truth. [me]
http://www.stephenbottcher.net
boocephus
Posts: 52
Joined: Thu Jul 11, 2013 1:58 pm

Re: Parts Source

Post by boocephus »

i bought pistons and rings and some other hard parts from them several years back. i remember it being the best deal i could find. i guess i just need to cash out and see how high it ends up being. thanks.
User avatar
DucatiPete
Posts: 257
Joined: Sun Aug 15, 2010 3:10 am

Re: Parts Source

Post by DucatiPete »

Motobins are my "go to" parts guys, but, of course I'm in Australia...

I've used Hucky too and he's prolly one of the best for /5 bits, but you have to send him the order money via Western Union, which is expensive (and a PITA). At least he was happy to send it down here...

Oh yeah, that reminds me: this thread was primarily about shipping (times/costs) to the US... well, can't comment on that, of course. Just gotta say that m'bins have been most excellent for me (gladly spent many $100s with 'em). My local alternatives usually add (at least) 25-50% more in cost per part, and even with the shipping costs included the total is still way lower.

Nothing but positive recommendations from me re the 'bins...

(I always make a substantial order to justify the shipping, so I've got a good supply of parts on hand - so now no excuses for fixing that dodgy rubber bit etc...)
User avatar
SteveD
Posts: 4929
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Parts Source

Post by SteveD »

Motorworks now ships to NA. That changed earlier this year I believe. Similar pricing and service as good as M'bins.
http://www.motorworks.co.uk/vlive/Home/index.php
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Post Reply