Cylinder Head Cover Painting Tips

Discuss all things 1970 & later Airheads right here.
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Cylinder Head Cover Painting Tips

Post by Major Softie »

Well, Vanzen's experiences have been different than my own.

As far as touch-up, either I measure my results by a higher standard, or Vanzen is more talented than I. I find touching up paint to be more successful because I can touch it up with the exact same product.
MS - out
dwerbil
Moderator
Posts: 2856
Joined: Tue Aug 03, 2010 10:58 am
Location: Round Rock, Texas
Contact:

Re: Cylinder Head Cover Painting Tips

Post by dwerbil »

I bought one of those Harbor Fright sand blasting cabinets some time ago. When the valve covers get a bit crusty looking and need a spit shine, I'll do a quick blast over and wash. After they're dry, I'll use a satin high temp black spray can on them, maybe five or six coats. After a couple hours of dry time, I'll use the bench grinder wire wheel to buff the paint off the stripes. It takes a bit of finesse, but the results looks good. If not, just spray'n buff again until it's right.
Image

Click for pics
04 R1150RT ~ 78 R100/7 ~ 84 RS ~ 93 K1100RS ~ 65 R60/2
Randy in Round Rock
User avatar
gspd
Posts: 1041
Joined: Tue Aug 03, 2010 8:04 pm

OCD - Obsessive Compulsive Disorder

Post by gspd »

Image
Gloss black powdercoat w/polished fins.
Mechanic from Hell
"I remember every raging second of it...
My bike was on fire, the road was on fire, and I was on fire.
It was the best ride ever!"
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Cylinder Head Cover Painting Tips

Post by ME 109 »

Gidday mate, I knew you couldn't resist this thread. :mrgreen:
Lord of the Bings
User avatar
SteveD
Posts: 4909
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Cylinder Head Cover Painting Tips

Post by SteveD »

ME 109 wrote:Gidday mate, I knew you couldn't resist this thread. :mrgreen:
He is an ARTISTE ain't he!
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Cylinder Head Cover Painting Tips

Post by Airbear »

Welcome, GSPD. Fer chrissakes, siddown - yer makin' the place look untidy. Whadd'll you have?*

*When you get this greeting from an Aussie, it means that you are welcome, and you should make yourself as comfortable as possible within reason, (e.g. kick off your thongs (er, flip-flops (?)) but don't root the missus), that you will be compulsorily provided with something alcoholic to drink, or something else that is regarded by that particular sub-culture as nice, and that it is generally believed by the company present that you are a 'good bloke'.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
P51j
Posts: 4
Joined: Wed Oct 13, 2010 8:49 pm
Location: Oak Ridge, TN

Re: Cylinder Head Cover Painting Tips

Post by P51j »

A little late for my reply but I have had great success with VHT products. Some of which can be purchased from local auto parts places. I have bought from http://www.caswellplating.com/vht/vht_oils.htm
They always have what I need and are quick to fill orders. The brake caliper paint really hangs on once baked or dried with hot air dryer.
BergMeister
Posts: 1
Joined: Fri Oct 15, 2010 9:19 pm

Re: Cylinder Head Cover Painting Tips

Post by BergMeister »

I used crinkle pain on mine. Love the look.

1st post!!!

BergMeister
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Cylinder Head Cover Painting Tips

Post by Major Softie »

BergMeister wrote:1st post!!!

BergMeister

Woo Hoo!!!
MS - out
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Cylinder Head Cover Painting Tips

Post by Airbear »

BergMeister wrote:I used crinkle pain on mine. Love the look.

1st post!!!

BergMeister
Gotta watch that crinkle pain. My crinkles are always giving me trouble, particularly in the cooler weather.

Welcome to the Monkey House, BergMeister!
Where do you live and what do you ride?
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
Post Reply