Motorhead wrote: FRed operated better in the 1/4 to 1/2 are better now instead of the 1/3 to 3/4 I was USEING.
Well done Motorhead!
My RS operates well around the 4/4 area.
Although a valve head did fall off once at about 5/4
?
Re: ? solved
Well done Motorhead!
My RS operates well around the 4/4 area.
Although a valve head did fall off once at about 5/4
Lord of the Bings
Re: ? its back
after a week of rideing and a couple of rounds of the Palos Verdie roads with a certain area I like to check suspension and also other good roads for handeling the motor seemed fine! so today I rechecked my compression and its back to 95 PSI left and 100 right
so today I want to ask this question those that used Ted Porter or another well known guru to rebuild their head whats the out come in quality and lasting use
also as my cylinder and pistons are used firsts with new rings whats the opinion of going rebore and sourceing NEW piston
or maybe better to try a aftermarket topend from Isreal Motorad
maybe its just the California GAS.............
so today I want to ask this question those that used Ted Porter or another well known guru to rebuild their head whats the out come in quality and lasting use
also as my cylinder and pistons are used firsts with new rings whats the opinion of going rebore and sourceing NEW piston
or maybe better to try a aftermarket topend from Isreal Motorad
maybe its just the California GAS.............