Re: Handlebar lighting switch
Posted: Thu Aug 22, 2013 1:53 pm
"There were no complaints about the then-new single disc brake, and certainly no claim that the drum brakes on the /5 bikes had been better than the single disc. The ATE disc brakes, both dual and single-disc, were standard equipment on airheads for 7 model years ('74 through '80)--- nearly twice as long as the cable-operated front drums on the /5s."
The bike reviews of that era were fiction in order to keep/support the advertisers. Those of us working in the industry all knew it and joked about the worthless reviews.
The dual leading edge front brake of the /5 first came about in 1955, maybe 54 on the R25/3. Over the years the friction material was improved, but that system was well lauded by the industry as far superior to the typical Brit single leading edge brake. That brake is almost 20 years old, not the 4 years claimed.
The Japanese bikes came out with dual leading edge brakes too and they stopped better due to superior friction material......... at first. They weren't self adjusting, as one had to adjust the linkage arm to keep them both working equally. Few did it, and very few knew how to adjust them. Often within a year or two they lost stopping power, just due to lack of maintenance.
From the start, the BMW dual leading edge brakes were self adjusting. This allowed them to work for a longer period of time. They too suffered from lack of maintenance. The posts needed to be cleaned and lubricated after a dozen years, or so, depending upon the humidity.
I just wish that BMW had been willing to use softer friction material and sacrifice the service life and get better stopping from their superior system.
Just wanted to keep the facts straight. One is entitled to ones own opinion, but not to the facts.
The bike reviews of that era were fiction in order to keep/support the advertisers. Those of us working in the industry all knew it and joked about the worthless reviews.
The dual leading edge front brake of the /5 first came about in 1955, maybe 54 on the R25/3. Over the years the friction material was improved, but that system was well lauded by the industry as far superior to the typical Brit single leading edge brake. That brake is almost 20 years old, not the 4 years claimed.
The Japanese bikes came out with dual leading edge brakes too and they stopped better due to superior friction material......... at first. They weren't self adjusting, as one had to adjust the linkage arm to keep them both working equally. Few did it, and very few knew how to adjust them. Often within a year or two they lost stopping power, just due to lack of maintenance.
From the start, the BMW dual leading edge brakes were self adjusting. This allowed them to work for a longer period of time. They too suffered from lack of maintenance. The posts needed to be cleaned and lubricated after a dozen years, or so, depending upon the humidity.
I just wish that BMW had been willing to use softer friction material and sacrifice the service life and get better stopping from their superior system.
Just wanted to keep the facts straight. One is entitled to ones own opinion, but not to the facts.