Page 1 of 1

rear brake line question

Posted: Tue Apr 02, 2019 8:22 am
by bluesman
Hello All,
I have a '79 r100 with a rear disc brake and I am looking at replacing the lines from the MC to the caliper with a one piece stainless line. Does anyone know if the male fitting going into the caliper is convex or concave? I want to keep riding until I figure out what I need.

Thanks,

Re: rear brake line question

Posted: Tue Apr 02, 2019 3:52 pm
by Rob Frankham
It's a standard conic fittimg with the cone on the end of the hose...

Rob

Re: rear brake line question

Posted: Tue Apr 02, 2019 4:05 pm
by bluesman
Thank you!

Re: rear brake line question

Posted: Wed Apr 10, 2019 4:45 am
by boxme60
I would also like to thank you for the answer. Just put in a nutshell.

Re: rear brake line question

Posted: Wed Apr 10, 2019 5:24 am
by boxme60
Too bad that it does not exist for older models too ...https://www.motorcycleparts-hornig.com/ ... r-Kit.html

Re: rear brake line question

Posted: Wed Apr 10, 2019 4:48 pm
by robert