Page 1 of 1
Luftmeister faring help
Posted: Tue Jul 14, 2020 10:28 am
by KeithW
- B2281ADB-B4C1-499D-91BE-252FBFC0B5DE.jpg (82.33 KiB) Viewed 665 times
I know you opinions on these.
But I have one to mount & I can't remember how do it. On a 1983 R100 with a Watsonian sidecar. If anyone of you have a copy of the instructions could you help to remember?
Ken in Oklahoma posted on old forum, but not compete. I need wiring info too.
Re: Luftmeister faring help
Posted: Tue Jul 14, 2020 1:09 pm
by Kurt in S.A.
Re: Luftmeister faring help
Posted: Tue Jul 14, 2020 2:45 pm
by melville
I have a /7 with a Lufty right now. Looks like there's a harness that goes into the headlight that has a multiplug that meets the fairing harness. I'm unable to comment about how things look inside the headlight shell as I don't have access to that area at this time due to the fairing being in the way. I will say that I was surprised to see unbent turnsignal stalks inside the fairing--this Lufty appears to have clearance for those.
The wires on the harness that goes to the headlight shell look like they have DIN colors on them, so I suppose it's just a matter of finding the appropriate connections inside the shell. If the harness wires don't have female spade terminals on them, I'd install those and work from the board inside the shell rather than splice things to existing wires, which is what a PO did with a Hannigan that was on my /6.
Re: Luftmeister faring help
Posted: Wed Jul 15, 2020 7:13 am
by KeithW
THANKS for help Kurt in S A
It was it.