Page 1 of 1

New one on a R100

Posted: Fri May 28, 2021 2:04 am
by extranat
Hi everyone,

I'm new on the forum, i'm from France, based in Annecy (french Alps :D ) and I have a 93 R100RT1 restored by myself (quite proud of it :D )

i'm seeking for an equipment for it i can't find in Europe.. maybe some of you may help :mrgreen:

Re: New one on a R100

Posted: Fri May 28, 2021 2:17 am
by SteveD
Bienvenue extranat.

Pictures or it's all lies! ;) Somewhere on the Col de la Machine would do nicely. :shock:

What are you after?

Re: New one on a R100

Posted: Fri May 28, 2021 4:41 pm
by Zombie Master
Maybe if you shared what equipment you are looking for, we might be able to help.

Re: New one on a R100

Posted: Mon May 31, 2021 2:16 am
by extranat
You mean something like this ? ;)
IMG_0107.jpg
IMG_0107.jpg (356.37 KiB) Viewed 858 times

I know that in the US there are some equipments that exist that are not available in Europe :(

i'm looking for top case carrier that is not set on the fiber rear bottom of the bike.
I had one from a K75/K100 that fit on the R100 (can see it on the picture but remove since i took it), but all the weight goes through the fiber part and it breaks.

So i'm looking for something that would support my top case :D

Re: New one on a R100

Posted: Mon May 31, 2021 5:03 am
by SteveD
The steel tubed pannier frames from the twin shock models sometimes had a bracket along the top. That enabled the attachment of a rack that sometimes also had a backrest. I'm unsure how you could do that with the Z track brackets.

Anyhow, good luck in your search.

Re: New one on a R100

Posted: Mon May 31, 2021 9:01 am
by extranat
yes i know it exists for the twin shock, but mine is a monolever :(

i've looked ine france, england and germany, I didn't find any shop to purchase such a thing

maybe one of you know where i can find this even if i have to make it come from US ?

Re: New one on a R100

Posted: Mon May 31, 2021 10:06 pm
by Seth
I'm not sure if you saw this, or if it fits, but according to the website, it does...
you'll need these three things.

https://www.siebenrock.com/en/luggage/t ... rack?c=663
https://www.siebenrock.com/en/luggage/t ... ting-plate
https://www.siebenrock.com/en/luggage/t ... pcase-tk50

but this might be what you're concerned about, that the weight breaks the tail section.

Re: New one on a R100

Posted: Tue Jun 01, 2021 1:30 am
by extranat
thanks for your help ;)
but i've already tried this one. The top case doesn't really fit two helmets and the system makes the same issues on the fiber part :(