Under Tank Brake Master Cylinder Setup

[jackonz]

Am getting closer to getting my R80/7 back on the road, but need some info from those in the know, as the feeler gauge for setting the brake cable adjustment is missing I need to make a replacement.
What I need to know from someone who has one what thickness it is, someone told me he thinks it's 0.010" but could not confirm it.

Thanks in anticipation.

[Kurt in S.A.]

The thickness is 1.168mm. Part number is 71-11-9-090-154 for the feeler gage set. Snowbum has a picture about 1/2 down this page:

https://bmwmotorcycletech.info/brakes.htm

Kurt