Boxerworks.com

Posted: **Tue Apr 29, 2025 5:39 am**

Is there a method to open these successfully to replace the glass?

They appear to be a snap together construction, no external fastenings to undo.

Is adhesive involved I wonder?

Anyone done this or just replaced them when necessary?

There's a small opening outer lower edge ... maybe access for a pry tool?

Posted: **Wed Apr 30, 2025 4:34 pm**

These mirrors are convex. Even if you could take it apart without destroying it and then put it back together so it looks perfect, you'll be hard pressed finding a piece of mirror glass with the same optics as the other side.

Posted: **Thu May 01, 2025 12:01 am**

gspd wrote: ↑Wed Apr 30, 2025 4:34 pm These mirrors are convex. Even if you could take it apart without destroying it and then put it back together so it looks perfect, you'll be hard pressed finding a piece of mirror glass with the same optics as the other side.

My mirrors are already different. The right one shows a vehicle much closer than the left. Remember, the right one shows the overtaking side.

Boxerworks.com

RS/RT rear vision mirror glass replacement.

RS/RT rear vision mirror glass replacement.

Re: RS/RT rear vision mirror glass replacement.

Re: RS/RT rear vision mirror glass replacement.