Page 1 of 2
					
				My bike is finished...
				Posted: Tue Jun 21, 2011 7:13 pm
				by dougie
				brakes
forks
steering head bearings
diode board 
regulator
rotor
coil
advance springs
ground wiring
cables
carbs rebuilt
rings
valves
pushrod seals
battery cables
clutch
main seal
final drive
SS exhaust system
LED brakelight
Now what the hell am I gonna do 
  
Oh wait. I could rebuild the gearbox.
It doesn't need it, and I have a spare, but what the hell..................... 

 
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 7:35 pm
				by lrz
				Ride it?
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 7:48 pm
				by Garnet
				Give it away to a good home and start again.
PM me if you need a good home, I'll even pick it up for a small milage fee.
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 7:54 pm
				by dougie
				
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 7:54 pm
				by dougie
				Garnet wrote:Give it away to a good home and start again.
PM me if you need a good home, I'll even pick it up for a small milage fee.
You are such a kind soul Garnet. 

 
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 7:58 pm
				by Airbear
				Well Doug, you could go riding and hope that something goes wrong. 
Or you could get another bike and do it all over again. If you are not the sort of bloke who can love more than one, just sell the R100 for much less than you spent on it (after all, if it really is 'finished' it will have limited appeal). 
A new 'unfinished' bike will put that spark and passion back into your life. It'll be like teenage love. Your first waking moments will be about the new bike and what you and she can do that day. Imagine facing the future, handlebar in hand, kicking the autumn leaves and gazing into her headlight with little sparkles flashing in your eyes. Your tools will be happy, your hands greasy again and your wallet empty, just like last time. 
Hope this helps.
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 8:22 pm
				by vanzen
				dougie wrote:
Now what the hell am I gonna do :?:  
Ride it. And, soon, mark my words, you will have something more to do ...
 
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 9:31 pm
				by Chuey
				May we see a picture of it?
Chuey
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 9:54 pm
				by Deleted User 62
				dougie wrote:brakes
forks
steering head bearings
diode board 
regulator
rotor
coil
advance springs
ground wiring
cables
carbs rebuilt
rings
valves
pushrod seals
battery cables
clutch
main seal
final drive
SS exhaust system
LED brakelight
Now what the hell am I gonna do 
  
Oh wait. I could rebuild the gearbox.
It doesn't need it, and I have a spare, but what the hell..................... 

 
It's the wheel bearings... that's what will go next... 

 
			 
			
					
				Re: My bike is finished...
				Posted: Tue Jun 21, 2011 10:50 pm
				by Ken in Oklahoma
				You are either a very brave or very reckless person Dougie, teasing fate the way you did. I would have expected you to have been smitten by the fate god already. Probably you already have and just don't know it yet. Something has already broken and you just haven't noticed it yet.
Ken