Boxerworks.com

I haven't lost my key I've had one key fer about 18 years.

A while ago someone posted how to hot wire AND have working instruments and lights etc.
I think it involved the brake light or the auxiliary outlet?

Anyone remember?

I find it shocking you want to do this mate... Let this guy be a lesson to you... hehehehehe

http://www.youtube.com/watch?v=8IJI45tYwWU

I don't want to power my flux capacitor Ross, just start the bike.............when I do lose my key.
Easy enough to just power the coils from the battery but there is a way to give power to just about all electrics, starter motor included.
Scratch my head, was it battery positive to brake light positive??
Battery positive to aux positive??

Scratch scratch scratch

Here it is.
http://www.boxerworks.com/forum2/viewto ... 6&start=10

Thanks Steve! Nothing wrong with my memory, son of a gun!
I shall make a little hot wire before heading into the outback in 3 weeks.
Ducati Pete's coming on his GS, anyone else? (besides the others that are coming that is)

You could always do the 'permanent fix' with a bit of epoxy, Jeff.

Airbear wrote:You could always do the 'permanent fix' with a bit of epoxy, Jeff.

What and glue the key in the ignition barrel?

Ross wrote:

Airbear wrote:You could always do the 'permanent fix' with a bit of epoxy, Jeff.

What and glue the key in the ignition barrel?

Of course, Ross. You'd never lose it then. I took the key out of my bike once. Came back to it, put all the gear on, went to start - no key. Had to take the gloves off and go searching the pockets. That's a few seconds I'll never get back. I learnt my lesson.

Ross wrote:What and glue the key in the ignition barrel?

I thought that's what you meant Charlie, but I thought I'd let Ross ask first.