Page 1 of 1

Pannier compatiblity.

Posted: Thu Sep 22, 2011 1:38 pm
by Garnet
Has anyone put 80s BMW bags on a /5?

There are some used ones avaiable localy which is rare.

http://www.usedvictoria.com/classified- ... s_15784894

I know the brackets are of little use but not sure if the bags will tuck in neatly like the Kausers did.

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 3:30 pm
by Major Softie
As long as you are handy with fabrication (to make custom brackets), I would think they would tuck in very nicely.

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 7:16 pm
by moosehead
These bags are for a R100GS therefore are different sizes left vs right! They will not work on the R75!

I know as had them on my GS. The left side bag is smaller due to exhaust system on left side of bike whereas the right side bag is considerably bigger.

Don't know if can see in this pic...the left bag smaller then right I(GS on the right in photo)
Image
Another shot...
Image



The "system cases" that are on the RT (left in phto) are symetrical in size - left and right. Probably will work on the R75 but personally think the Krausers would look better IMHO...how about some Cravens...cool
In black...
Image
or white...
Image

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 7:54 pm
by Garnet
I forgot about the 2 different sizes. :oops:

I had a nice set of Cravens like that, but I GAVE them to a buddy of mine and the bastard typical airhead rider won't give them back. :cry:

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 8:21 pm
by Deleted User 62
Hey Garnet, I have a nice set of Krausers with mounts for a short wheelbase /5, PM me if you are interested.

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 9:09 pm
by Major Softie
Those aren't "System" cases on the RT. Hard to see for sure, but they are probably "Integral" cases that were on late 80's - early 90's bikes. System cases are what are on early 1100 - 1150 Oilheads. I don't think there were ever any System cases for Airheads.

Re: Pannier compatiblity.

Posted: Thu Sep 22, 2011 11:41 pm
by moosehead
Thank you MS...I relly didn't like any of the "intregal" cases. Locks were numbing to use for one thing. Preferred the Krausers.

But I loved the Hepco-Becker Exepditions... great for holding couple bags of ice and load of chilled beers all day at a campsite...were also handy bench and table as well as a work bench if required :lol:
Image


Wish I never sold them with the GS. I shoulda kept them. Looking for a set to put on an R100 beater I use for the backroads camping expeditions now. They would look cool on an R75 n'est pas? Garnet what do you think?

Re: Pannier compatiblity.

Posted: Fri Sep 23, 2011 12:53 am
by Garnet
They would certainly make my /5 look .... ah..... big.

Re: Pannier compatiblity.

Posted: Fri Sep 23, 2011 2:34 am
by SteveD
Major Softie wrote:Those aren't "System" cases on the RT. Hard to see for sure, but they are probably "Integral" cases that were on late 80's - early 90's bikes. System cases are what are on early 1100 - 1150 Oilheads. I don't think there were ever any System cases for Airheads.
The RT has what was called "Classic Panniers" oem BMW issue. I'm almost certain they fit any long base twin shock including the R45 and R65. The 45 and 65 used those same panniers, but had a different frame to suit the bike. I'd guess the right side pannier would also be the same one for the g/s or ST, but the left is different to account for the muffler.