Page 1 of 1
Thanks to SteveD in Melbourne, Oz
Posted: Sun Feb 23, 2014 9:00 pm
by timkil
SteveD, I used the caliper up brake fluid injection method you described in one of your posts after I installed new handlebars and brake lines. I had a totally empty system and it worked a treat. Filled the left side first then listened to the bubbles as I did the right side. Good firm lever and not a bubble in sight on the first try. Thanks
Re: Thanks to SteveD in Melbourne, Oz
Posted: Sun Feb 23, 2014 9:03 pm
by dwerbil
Does this place rock or what!
Re: Thanks to SteveD in Melbourne, Oz
Posted: Sun Feb 23, 2014 11:21 pm
by ME 109
dwerbil wrote:Does this place rock or what!
Steve's the 'brake man'.
I'll be looking up his great caliper rebuild thread before long.
Re: Thanks to SteveD in Melbourne, Oz
Posted: Mon Feb 24, 2014 12:26 am
by Primate
timkil wrote:SteveD, I used the caliper up brake fluid injection method you described in one of your posts after I installed new handlebars and brake lines. I had a totally empty system and it worked a treat. Filled the left side first then listened to the bubbles as I did the right side. Good firm lever and not a bubble in sight on the first try. Thanks
I effed it up the first few times I tried it, but now that I get it
, it's a great method.
Re: Thanks to SteveD in Melbourne, Oz
Posted: Mon Feb 24, 2014 5:22 am
by SteveD
Cool. Glad it did the job.
Re: Thanks to SteveD in Melbourne, Oz
Posted: Mon Feb 24, 2014 7:17 pm
by timkil
I should also say thanks to Moosehead for the brake line information. You guys rock and roll.