Page 1 of 1
'81 R100: separating driveshaft from rear drive
Posted: Sun Apr 17, 2016 9:10 pm
by itsme
Any trick to this? My rear drive's big left seal is leaking and I'd like to remove it.
I disconnected the brakes, removed the shock, and removed the 4 bolts holding the driveshaft and rear drive together, but no love!
Re: '81 R100: separating driveshaft from rear drive
Posted: Sun Apr 17, 2016 11:53 pm
by Bamboo812
Give it a few good whacks with a rubber hammer. Someone most likely used glue the last time they mounted it...
Re: '81 R100: separating driveshaft from rear drive
Posted: Mon Apr 18, 2016 12:43 am
by itsme
Okay, thanks. Just wanted to check if that was the right thing to do.
Re: '81 R100: separating driveshaft from rear drive
Posted: Mon Apr 18, 2016 11:22 am
by itsme
Got it off with a quick sideways rap. Thanks again.
Now, any help with that big seal? The inside cover has to come off?