Search found 9 matches

by 8 Gauge
Thu Apr 12, 2012 8:38 pm
Forum: Post 1970 Airheads
Topic: 75/5 Maintenance and expectations for newbie
Replies: 10
Views: 1691

Re: 75/5 Maintenance and expectations for newbie

Thanks all! The whine is only when starting and the "clunk" isn't really bad at all. I'm pretty sure that this is just me being overly concerned. That said, I'll probably end up taking it apart with the service manual in hand and check specs to be on the safe side. The tranny seems fine (I...
by 8 Gauge
Thu Apr 12, 2012 1:51 am
Forum: Post 1970 Airheads
Topic: 75/5 Maintenance and expectations for newbie
Replies: 10
Views: 1691

75/5 Maintenance and expectations for newbie

Regards and thanks in advance for the tips! I'm the guy that posted the thread about Mikuni carbs for my 75/5. Seems that shes running great now so I have a few questions before I put some miles on her. In the last 10 years, very little miles were put on my machine. I swapped my bings with Mikunis b...
by 8 Gauge
Mon Apr 09, 2012 10:23 pm
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

And when you are headin' down a nice curvy road well out of town with a grin on your face and everything feeling right - that would be a good time to thank your grandpappy for the fine inheritance. I have a grin on my face just thinking about it! Good call on getting the battery checked out. I wond...
by 8 Gauge
Mon Apr 09, 2012 12:33 am
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

Had more time to play around than I was expecting this weekend which was a nice surprise! 3/4 valves were within spec. Only the exhaust valve on the left cylinder (the one thats running nicely) was slightly out of spec on the open side. Now that I know this I can hear a faint ticking coming out of t...
by 8 Gauge
Thu Apr 05, 2012 1:10 am
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

Thanks for all the info! Will update as I find out more. Wish I had more wrenching time but work, grad school and keeping the girl happy are kicking my butt. For some reason she doesn't believe that hanging out in the garage is "quality time." Here's a pic of what I'm working with. Shes in...
by 8 Gauge
Tue Apr 03, 2012 9:41 pm
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

Curiosity got the best of me and I pulled the valve covers. Didn't get the time to get out the feeler gauges, but by "eyeballing it" all valve clearances seemed reasonable. I was able to spin all the push rods and everything seemed tight and nothing seemed to be adjusted very far off from ...
by 8 Gauge
Tue Apr 03, 2012 5:56 pm
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

Thank you all for providing feedback! Before I dive into tuning I am going go check valve specs and then move on to ignition timing. I have a hunch that my ignition system is on due to her running nicely for part of last year. I was pleasantly surprised that the bike had a ton of torque that came on...
by 8 Gauge
Tue Apr 03, 2012 12:49 am
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

Re: R75/5 w/Mikuni question

Adding a bit of information as I scour the Internet for more knowledge. My right cylinder seemed off with my Bings and also seems off a bit with the MIkunis as well. With the filters off she coughs a bit of fuel/air out of the right side carb a bit. Usually only after i rev her up a bit and the revs...
by 8 Gauge
Mon Apr 02, 2012 2:41 am
Forum: Post 1970 Airheads
Topic: R75/5 w/Mikuni question
Replies: 17
Views: 4014

R75/5 w/Mikuni question

First post on your forums. Glad to be here and thanks for your advice; in advance! A little history on my machine: I inherited a '70 r75/5 from my grand father. Have been doing some minor tinkering with it for years and finally got her on the road last year. I rebuilt my Bings and had her running de...