Oz-Boxerworks - Spring run

This is for the discussion of Motorcycling. The art, the science, the theory of all things related to our favorite sport... riding motorcycles.
Mal S7
Posts: 661
Joined: Thu Aug 05, 2010 5:26 am

Re: Oz-Boxerworks - Spring run

Post by Mal S7 »

Ahh well Charlie it was actually the BLFSC that brought me undone that night.

I'm just back from a few enjoyable days work in Newcastle, will attempt a description of events soon as I get a beer

Mal
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Oz-Boxerworks - Spring run

Post by Airbear »

Hang on, the Boxerworks Liberation Front Social Club was meeting at Picnic Point that night. Is there a splinter group?
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
User avatar
SteveD
Posts: 4909
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Oz-Boxerworks - Spring run

Post by SteveD »

Mal S7 wrote:I'm just back from a few enjoyable days work in Newcastle, will attempt a description of events soon as I get a beer
Still drinkin' Mal? :D
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Expressions of Interest

Post by Airbear »

Well, I'm back on the road again. I discovered a spun rear wheel bearing, explaining the low speed head-shaking I experienced on the First Spring Rally. This was a fail for the epoxy bodge I did about 40k kms ago. Fortunately I had a spare wheel on hand with a good spline cup, so added new bearings and a new Pilot Activ tyre. I'll get the original wheel fixed - the hub needs to be bored and sleeved. Brunhilde is very happy now - no more wiggling around corners.

I caught up with Jeff today. He was movin' rocks, poolside. His bike will be back on the road in a week or so after a bit of machining work on intimate engine bits.

Anyway, we discussed the need for a ride; a Second Spring Rally. In November we have 5-6, or 12-13, or 19-20 or 26-27. I'm easy about when and where but I know a lot of you have family obligations. So please throw some ideas around and we'll see what happens.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Oz-Boxerworks - Spring run

Post by ME 109 »

Better go for 12-13 mesself, just to make sure me bits are back, and on the bike.
That spot on the King river at Cheshunt, near Whitfield might be a good spot?
Lord of the Bings
User avatar
SteveD
Posts: 4909
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Oz-Boxerworks - Spring run

Post by SteveD »

I'm a good chance for 12-13 too. Whitfield is a good spot.
There'll be a few BMW's out in the region that weekend, but a little further away.
https://www.bmwmotorradrally.com.au/
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Oz-Boxerworks - Spring run

Post by Airbear »

SteveD wrote:I'm a good chance for 12-13 too. Whitfield is a good spot.
There'll be a few BMW's out in the region that weekend, but a little further away.
https://www.bmwmotorradrally.com.au/
Hey, if we were members of the BMW Club of Victoria or an affiliated BMW club we would be permitted to go to that BMW Rally. Entry is only $60 and because we are cheap bastards we could get an unpowered tent site at the caravan park for $85.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Oz-Boxerworks - Spring run

Post by ME 109 »

.
Last edited by ME 109 on Sat Oct 29, 2016 2:39 pm, edited 1 time in total.
Lord of the Bings
User avatar
Airbear
Posts: 2886
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: Oz-Boxerworks - Spring run

Post by Airbear »

Check out the Sponsorship page: https://www.bmwmotorradrally.com.au/1/info/sponsors

Note that the Doncaster BMW Motorrad Boutique has proudly announced a "$15 million redevelopment". I wonder if there will be a Jacuzzi? Next time I'm in that neighbourhood I might go there and see if I can get finance to buy a couple of sparkplugs.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Oz-Boxerworks - Spring run

Post by ME 109 »

"Outside of the showroom, a test-ride of your next BMW is guaranteed to be exhilarating with some of Victoria's best roads nearby, away from the congestion of the City."

They got to be kidding? :lol:

Wankers. I might ring and ask if I can test ride on one of Victorias best roads......

https://www.youtube.com/watch?v=mZ6BVcK7Nhw
Lord of the Bings
Post Reply