Yes it is. Nice guy, but between running the shop and being an AirMarshal for the ABC he seems completely worn out to me.
Identification
Re: Identification
After 20 years as a professional bike mechanic and 30 years as an engineer I know just enough to be dangerous !
Re: Identification
ZM, please tell Claude I still am grateful he took the time to help me iron out the LED turn signal issue on my Cafe Racer. Wish him a happy holiday season from me, please.
richard t, that's about what I heard. He did have a very bad crash about the time he dropped away from Boxerworks as I recall. After he dropped away, I think.
Chuey
richard t, that's about what I heard. He did have a very bad crash about the time he dropped away from Boxerworks as I recall. After he dropped away, I think.
Chuey
- Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Identification
And of course, he is the self proclaimed fastest rider here.
Any and all disclaimers may apply
- Airbear
- Posts: 2887
- Joined: Tue Aug 03, 2010 10:02 am
- Location: Oz, lower right hand side, in a bit, just over the lumpy part.
Re: Identification
I must have missed that, ZM. Can you elaborate?Zombie Master wrote: ↑Tue Dec 19, 2017 10:31 pmAnd of course, he is the self proclaimed fastest rider here.
Charlie
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
- Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Identification
Wob:Airbear wrote: ↑Tue Dec 19, 2017 11:56 pmI must have missed that, ZM. Can you elaborate?Zombie Master wrote: ↑Tue Dec 19, 2017 10:31 pmAnd of course, he is the self proclaimed fastest rider here.
"I ride just as fast or faster than anyone else, but I never call attention to myself with showy starts, throttle jacking, Mohawk helmets, all that crazy stuff that says "come and get me" to a cop. And I haven't been pulled over in 30 years."
Any and all disclaimers may apply
- Airbear
- Posts: 2887
- Joined: Tue Aug 03, 2010 10:02 am
- Location: Oz, lower right hand side, in a bit, just over the lumpy part.
Re: Identification
Seems like a perfectly reasonable statement to me, old chap. I could write the same and not consider that I had proclaimed myself as being the fastest rider here in some sort of boastful way.
I don't get the apparent antagonism towards a new member.
I don't get the apparent antagonism towards a new member.
Charlie
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
- Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Identification
Words matter. "I ride just as fast or faster than anyone else" is simply BS. Could be the political climate, making me sensitive to exaggeration, and distortion of the truth.
Any and all disclaimers may apply
Re: Identification
Thank you.
And Merry Christmas.
After 20 years as a professional bike mechanic and 30 years as an engineer I know just enough to be dangerous !
- Airbear
- Posts: 2887
- Joined: Tue Aug 03, 2010 10:02 am
- Location: Oz, lower right hand side, in a bit, just over the lumpy part.
Re: Identification
Thanks Wobbly, and I wish a pleasant silly season to all.
Charlie
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
and Brunhilde - 1974 R90/6
Graduate, Wallace and Gromit School of Engineering and Design (Pending)
- dirtsurfer
- Posts: 61
- Joined: Sun Feb 17, 2013 6:17 am
- Location: Sydney, Australia
Re: Identification
Agreed. It would be chilly around the stanchions without