Hello to one and all, I hope this is the right section to introduce myself, not sure being a newbie to the forum, also a bit unsure if I will be welcome due to what I've done which is put a 1985 R65 engine into my Dnepr outfit, should I get my coat and leave?
With respect Jonathan
Hello
Re: Hello
Welcome aboard!
DNEPR?! you say?
Here's me, around 1980, before I put a VW engine into it.
H![Image](https://beta-static.photobucket.com/images/ee194/1990gspd/s0/65e31816-0c10-4c23-9690-837fac23063f-original.jpg?width=1920&height=1080&fit=bounds)
DNEPR?! you say?
Here's me, around 1980, before I put a VW engine into it.
H
![Image](https://beta-static.photobucket.com/images/ee194/1990gspd/s0/65e31816-0c10-4c23-9690-837fac23063f-original.jpg?width=1920&height=1080&fit=bounds)
Mechanic from Hell
"I remember every raging second of it...
My bike was on fire, the road was on fire, and I was on fire.
It was the best ride ever!"
"I remember every raging second of it...
My bike was on fire, the road was on fire, and I was on fire.
It was the best ride ever!"
- Steve in Golden
- Posts: 3094
- Joined: Tue Aug 03, 2010 4:30 pm
- Location: Golden, CO USA
Re: Hello
Welcome aboard Jonathan!
- Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Hello
Welcome! I'm the site troll, and think anything other than stock is incorrect.
Here's the rules:
No rules.
Here's the rules:
No rules.
Any and all disclaimers may apply
Re: Hello
Hi Chaps, thanks for the warm welcome and allowing me to be part of this great forum. I registered back in May but was unsure about posting due to the fact that my outfit was a hybrid, I started by searching the different topics and came across one relating to what I was going to atempt , I took the chance and emailed Mike Lydon who had responed to the original post. With great surprise and happiness he replied. At this point I would like to say a big thankyou to this forum and especillay Mike who has helped and guided me through the process of converting the R65 engine to fit my Dnepr frame. May I please ask is there away of me making a monetary contribute to the up keep of this fantastic forum. I have quite a few questions to ask about these wonderfully engineered engines.
best regards
Chisler
best regards
Chisler
- Steve in Golden
- Posts: 3094
- Joined: Tue Aug 03, 2010 4:30 pm
- Location: Golden, CO USA
Re: Hello
Jonathan, we love questions! Ask away, and no worries on making a contribution to the forum. We've got it covered. If you want to make a contribution, you can of course. Send me a PM (private message) and I will send you the email address for a paypal contribution. Don't want to post it because of spammers.
Re: Hello
Hi Steve, have just made paypal contribution towards the up keep of the site, many thanks to admin team for a great informative site
Looking forward to contributing with posts, please excuse and be patient with newbie questions to come .
Best regards
Jonathan
Looking forward to contributing with posts, please excuse and be patient with newbie questions to come .
Best regards
Jonathan
- Steve in Golden
- Posts: 3094
- Joined: Tue Aug 03, 2010 4:30 pm
- Location: Golden, CO USA
Re: Hello
Thank you Jonathan! We look forward to your questions, and as Duane used to say, "If we don't know the answer, we'll make one up!".
Just kidding.
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
Just kidding.
- Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Hello
https://w6rec.com/Steve in Golden wrote: ↑Mon Sep 24, 2018 1:50 pm Thank you Jonathan! We look forward to your questions, and as Duane used to say, "If we don't know the answer, we'll make one up!".![]()
Just kidding.
![Smile :)](./images/smilies/icon_e_smile.gif)
Any and all disclaimers may apply