New one on a R100

[extranat]

Hi everyone,

I'm new on the forum, i'm from France, based in Annecy (french Alps ) and I have a 93 R100RT1 restored by myself (quite proud of it )

i'm seeking for an equipment for it i can't find in Europe.. maybe some of you may help

[SteveD]

Bienvenue extranat.

Pictures or it's all lies! Somewhere on the Col de la Machine would do nicely.

What are you after?

[Zombie Master]

Maybe if you shared what equipment you are looking for, we might be able to help.

[extranat]

You mean something like this ?

IMG_0107.jpg (356.37 KiB) Viewed 926 times

I know that in the US there are some equipments that exist that are not available in Europe

i'm looking for top case carrier that is not set on the fiber rear bottom of the bike.
I had one from a K75/K100 that fit on the R100 (can see it on the picture but remove since i took it), but all the weight goes through the fiber part and it breaks.

So i'm looking for something that would support my top case

[SteveD]

The steel tubed pannier frames from the twin shock models sometimes had a bracket along the top. That enabled the attachment of a rack that sometimes also had a backrest. I'm unsure how you could do that with the Z track brackets.

Anyhow, good luck in your search.

[extranat]

yes i know it exists for the twin shock, but mine is a monolever

i've looked ine france, england and germany, I didn't find any shop to purchase such a thing

maybe one of you know where i can find this even if i have to make it come from US ?

[Seth]

I'm not sure if you saw this, or if it fits, but according to the website, it does...
you'll need these three things.

https://www.siebenrock.com/en/luggage/t ... rack?c=663
https://www.siebenrock.com/en/luggage/t ... ting-plate
https://www.siebenrock.com/en/luggage/t ... pcase-tk50

but this might be what you're concerned about, that the weight breaks the tail section.

[extranat]

thanks for your help
but i've already tried this one. The top case doesn't really fit two helmets and the system makes the same issues on the fiber part