Clutch pushrod felt seal

Discuss all things 1970 & later Airheads right here.
Post Reply
Rob Frankham
Posts: 1214
Joined: Thu Aug 26, 2010 2:11 pm
Location: Scotland UK, 20 miles from civilisation up a dead end road!
Contact:
Contact Rob Frankham

Re: Clutch pushrod felt seal

Post by Rob Frankham »

The later 'washerless' bolts should be tightened to between 38 and 42 nm or 28 and 31 lbf ft. The original bolts should never be fitted without washers (they are too long and will foul the oil seal). Bolts should be inserted dry... BMW service bulletin 26 002 83 (260R) refers.

Rob
ImageImageImage
Top
jackonz
Posts: 206
Joined: Sat Oct 30, 2021 5:29 pm

Re: Clutch pushrod felt seal

Post by jackonz »

Rob Frankham wrote: ↑Sat Dec 02, 2023 5:30 am The later 'washerless' bolts should be tightened to between 38 and 42 nm or 28 and 31 lbf ft. The original bolts should never be fitted without washers (they are too long and will foul the oil seal). Bolts should be inserted dry... BMW service bulletin 26 002 83 (260R) refers.

Rob
Hi Rob, thank you for that info, yes am using the shorter new bolts without the lock washers.

Many Thanks and have a Merry Christmas.
Phil J

Nelson NZ.
Top
Post Reply

Return to “Post 1970 Airheads”