74 R75/6 electrical woes

[sap06003]

So I think it was actually a piece of a metallic type o ring, the ones that look like graphite. Does that make any sense. Ive got it running well, timing set proper as well as points. Getting some reading done on tuning the dellorto phm 38s it has on it, ordered some chock levers and nice hose clamps for the intake.

[sap06003]

IMG_3846.jpeg (1.73 MiB) Viewed 89 times

She rips better than I expected, def needs the fork springs, dives super hard. I also need the brakes to work a little scary since it hits 90mph in hurry, thinking of trying pads, I rebuilt master and caliper and bleed with srf.

[Rob Frankham]

Probably teaching grandma to suck eggs but... are you aware of the need to align the pads to the disc when assembling using the eccentric pivot pin? I guess the next step is to fit a second disc as fitted to the R90S... but good luck in finding a right fork slider... they exist but are a bit like hens teeth.

Airheads are known for their 'soft' suspension, especially the earlier models... even when the fork springs are new. Disconcerting until you get used to it but it does make for a very comfortable ride and doesn't really affect the handling. Changing the springs can make a difference but be careful else you'll end up with a very harsh ride and insufficient damping. Not trying to be rude but, if you want modern handling, get a modern bike. If you want to ride a 50 year old classic, be prepared to ride it like a classic.

Rob

[barryh]

Airheads are known for their 'soft' suspension, especially the earlier models... even when the form springs are new. Disconcerting until you get used to it but it does make for a very comfortable ride and doesn't really affect the handling. Changing the springs can make a difference but be careful else you'll end up with a very harsh ride and insufficient damping.

Rob

I like BMW's comfortable suspension. Some spring rate info that shows they got stiffer in later years