Non starting update

Discuss all things 1970 & later Airheads right here.
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Non starting update

Post by Sibbo »

My ST is still hard to start .It has a good spark and runs beautifully once going .Getting it going is the problem .I can't use any throttle at all and no choke .I just have to wind it and hope for it to catch .It starts and then dies after a few seconds .

If I do this a dozen times it will finally seem to catch ,sometimes not . She's going back to the mechanic as soon as I can get there , nothing missed at the moment as it's been raining for days .

All corrosion cleaned , new plugs ,leads and caps, coils fine , Hall Effect sensor OK I think .

Carbs are the probable culprit .They have been balanced and she runs perfectly once going !! WTF !

I'm not trying this one myself , it's right outside my mechanicing skills .

I'll keep you posted as results come in .
"You ain't gonna learn what you don't want to know"
The Grateful Dead
Kurt in S.A.
Posts: 1657
Joined: Tue Aug 03, 2010 12:08 pm

Re: Non starting update

Post by Kurt in S.A. »

Sounds like your enricheners might be effed up. Or maybe the cable mechanism is not engaging the enrichener as you expect. Easy to check the cable for proper action; only mildly more difficult to rework the enrichener.

Kurt in S.A.
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: Non starting update

Post by Sibbo »

I can't touch the throttle or choke when trying to start ...it completely stops any possibility of a start ..
"You ain't gonna learn what you don't want to know"
The Grateful Dead
ME 109
Posts: 7308
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Non starting update

Post by ME 109 »

There are 4 different ways the enrichers can be installed on the carbys.
Only one way is correct.
The enrichers can't work if not properly oriented.

Does it restart ok once the engine is warm Sibbo? (when no choke is needed)
Lord of the Bings
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: Non starting update

Post by Sibbo »

Yep,perfectly .It runs well too.
"You ain't gonna learn what you don't want to know"
The Grateful Dead
chasbmw
Posts: 765
Joined: Fri Aug 06, 2010 7:40 am
Location: Bath UK

Re: Non starting update

Post by chasbmw »

With cv carbs, I don't use any throttle, keep it closed until the engine catches and then pick it up on the throttle.

How long does it take for engine to 'catch'
Charles
Image
Replica 1070 R90/S (based on 82 RT)
1975 R90/6
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: Non starting update

Post by Sibbo »

Too long ,10 times ? 20 minutes yesterday . :roll:
"You ain't gonna learn what you don't want to know"
The Grateful Dead
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: Non starting update

Post by Sibbo »

It was wet yesterday , fine and warmer today . She started right up and idled at 250 rpm .Seems a low idle but smooth .
"You ain't gonna learn what you don't want to know"
The Grateful Dead
Duane Ausherman
Posts: 6008
Joined: Thu Aug 12, 2010 12:39 pm
Location: Galt California
Contact:

Re: Non starting update

Post by Duane Ausherman »

Are you using those original metal spark plug caps? Owning a BMW motorcycle repair shop in San Francisco told the story on those metal caps. The humidity is usually high and they just don't work.

We replaced all of them as standard procedure.
Ask the Indians what happens when you don't control immigration.
User avatar
Sibbo
Posts: 5637
Joined: Fri Aug 06, 2010 3:18 am
Location: Oz , half way up ,sitting on a wet spot .

Re: Non starting update

Post by Sibbo »

Hard plastic ones Duane .All 4 of them .
"You ain't gonna learn what you don't want to know"
The Grateful Dead
Post Reply