Does anyone have access point me to a good Online Colour R90/6 wiring diagram?
My bike is early 75, so the earlier 74 wiring diagram should work (eg no earth wires to front indicators). Many thanks
Charles
Early R90/6 wiring diagram
-
- Posts: 1664
- Joined: Tue Aug 03, 2010 12:08 pm
Re: Early R90/6 wiring diagram
Not sure if this is accruate enough or what you're looking for:
http://www.pbase.com/dwerbil/image/74487762
Kurt in S.A.
http://www.pbase.com/dwerbil/image/74487762
Kurt in S.A.
Re: Early R90/6 wiring diagram
Kurt, looking for something with a bit more detail
Charles
Charles
Re: Early R90/6 wiring diagram
Chas, here's the one from Airbear.
Very nice, thanks again to Charlie.
--edit, wouldn't let me attach a pdf, sent an email w/it
Very nice, thanks again to Charlie.
--edit, wouldn't let me attach a pdf, sent an email w/it
'74 - R90/6
-
- Posts: 1664
- Joined: Tue Aug 03, 2010 12:08 pm
- Airbear
- Posts: 2887
- Joined: Tue Aug 03, 2010 10:02 am
- Location: Oz, lower right hand side, in a bit, just over the lumpy part.
Re: Early R90/6 wiring diagram
Charles, I hope you got the one from PK. Please note that the labels for the Stop and Tail lamp filaments should be reversed (sorry, I haven't got around to repairing that one).
Here is the JPG

If anyone else wants the PDF just send me an email or a PM with your email address. There's also this one - a more sensible map for the instrument pod, also available as a higher res PDF.

Here is the JPG

If anyone else wants the PDF just send me an email or a PM with your email address. There's also this one - a more sensible map for the instrument pod, also available as a higher res PDF.

Charlie
and Brunhilde - 1974 R90/6

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
and Brunhilde - 1974 R90/6

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
Re: Early R90/6 wiring diagram
Can I just add that when Charlie sent me his most excellent wiring diagram I followed his recommendation and had it printed in A3 and laminated. It's now not only much clearer than the Haynes or Clymer efforts, but is larger and wipes clean of greasy fingerprints. An invaluable piece of kit.
"Never argue with a fool, onlookers might not be able to tell the difference." Samuel Clemens
Re: Early R90/6 wiring diagram
I have it on 11x17" paper and it's stuck with magnets to the metal doorl in my garage.
It is very nice, I'd print the instument pod one too, but I don't have one (instrument pod)
It is very nice, I'd print the instument pod one too, but I don't have one (instrument pod)
'74 - R90/6
Re: Early R90/6 wiring diagram
PK. Many thanks for sending me air bears diagram,
Airbear, many thanks for this, it is really clear and helpful, a copy will be printed and laminated and then rolled up and kept inside the main frame tube.
Thanks to you all
Charles
Airbear, many thanks for this, it is really clear and helpful, a copy will be printed and laminated and then rolled up and kept inside the main frame tube.
Thanks to you all
Charles
-
- Posts: 463
- Joined: Tue Aug 03, 2010 7:57 am
- Location: Canukstan...north of the checkerboard
Re: Early R90/6 wiring diagram
Pm'd ya Charlie for .pdf versions...
Thanks,
Bob
Thanks,
Bob
Retired from work....not life!