BMW has a better idea!

Discuss all things 1970 & later Airheads right here.
User avatar
dougie
Posts: 2540
Joined: Wed Aug 04, 2010 6:19 pm
Location: Burlington Ontario, Canada

Re: BMW has a better idea!

Post by dougie »

Jeff in W.C. wrote:How about needing to remove the engine--or at least the oil pan to remove the side stand. The local guru's here say the motor needs to come out. :evil: No wonder why very few people ever service the side stand.
It has been a few years, but if I remember (big if :?: ) ---
I supported the engine, removed the front engine mount bolt, and wiggled/tapped out the spacer/spring-holder (#6). I might have levered the frame away from the engine slightly to release its grip on the spacer.
The stand slides off the pin (#11) which is embedded in the frame. Again I might have had to lift the front of the engine a little to allow clearance for the stand to slide off.
I put the spacer (#6) back in, re-installed the front mounting bolt, and best of all - installed a Surefoot sidestand. :)

Image
I've spent most of my money on women, motorcycles, and beer.
The rest of it I just wasted.
User avatar
melville
Posts: 1815
Joined: Tue Aug 03, 2010 8:32 am

Re: BMW has a better idea!

Post by melville »

dougie wrote:
Jeff in W.C. wrote:How about needing to remove the engine--or at least the oil pan to remove the side stand. The local guru's here say the motor needs to come out. :evil: No wonder why very few people ever service the side stand.
It has been a few years, but if I remember (big if :?: ) ---
I supported the engine, removed the front engine mount bolt, and wiggled/tapped out the spacer/spring-holder (#6). I might have levered the frame away from the engine slightly to release its grip on the spacer.
The stand slides off the pin (#11) which is embedded in the frame. Again I might have had to lift the front of the engine a little to allow clearance for the stand to slide off.
I put the spacer (#6) back in, re-installed the front mounting bolt, and best of all - installed a Surefoot sidestand. :)

Image
I put the motor in before installing the sidestand and was able to mount same stock sidestand without removing the motor. Removed left front motor mount nut, slid bolt to the right, wiggled spacer out, mounted sidestand, put everything else back. /6 with an extra deep MAC sump.
Call me Mel. Some years ago- never mind how long precisely- having little or no money in my purse, and nothing particular to interest me at home, I thought I would ride about a little and see the other parts of the world.
She'llbe
Posts: 724
Joined: Tue Aug 03, 2010 6:48 pm

Re: BMW has a better idea!

Post by She'llbe »

I just put a brown sidestand on my bike as well. I left the original on to maintain originality, ha ha ha ha.
From the desk of the
Mt. Nardi Yacht Club
PO BOX 95
Nimbin, NSW
Australia 2480
02-6689-1234
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: BMW has a better idea!

Post by ME 109 »

The side stand on my RS is an oe brown sidestand.
I must clean it.
Lord of the Bings
dwerbil
Moderator
Posts: 2856
Joined: Tue Aug 03, 2010 10:58 am
Location: Round Rock, Texas
Contact:

Re: BMW has a better idea!

Post by dwerbil »

She'llbe wrote:I just put a brown sidestand on my bike as well. I left the original on to maintain originality, ha ha ha ha.
Add a chain or the like to deploy both at the same time. (the start of a Rube Goldberg machine!)
Image

Click for pics
04 R1150RT ~ 78 R100/7 ~ 84 RS ~ 93 K1100RS ~ 65 R60/2
Randy in Round Rock
Post Reply