Clutch adjustment

Discuss all things 1970 & later Airheads right here.
Duane Ausherman
Posts: 6008
Joined: Thu Aug 12, 2010 12:39 pm
Location: Galt California
Contact:

Re: Clutch adjustment

Post by Duane Ausherman »

I would never bother with that measurement, as it is way too slow. I can't believe that so much is made of adjusting the clutch. It is a really simple procedure.
Ask the Indians what happens when you don't control immigration.
ME 109
Posts: 7307
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Clutch adjustment

Post by ME 109 »

Duane Ausherman wrote:I would never bother with that measurement, as it is way too slow. I can't believe that so much is made of adjusting the clutch. It is a really simple procedure.
My clutch adjustment is based on ease of shifting from first to neutral at a red light.
I shift from first to neutral at red lights when I need to get my hands lower than my axles to drain all the pins and needles out.

Perhaps 203mm is a disguised Englishmans/Americanmans thing. It's awfully close to plain 'ol 8"
Lord of the Bings
chasbmw
Posts: 765
Joined: Fri Aug 06, 2010 7:40 am
Location: Bath UK

Re: Clutch adjustment

Post by chasbmw »

More likely to be a German thing really......if is was an English American instruction it would be 8 inches and 1/64th, or something similar and easy to understand.

There are various things that adversely affect the gear change on these bikes,especially now that there is wear up and down the clutch operating system, I struggled to get a decent gear change on my light flywheel bike, until I used the 201-203mm technique and it really transformed the gear change.

I understand that this method is now recommended for use on the heaven flywheel bikes as well.
Charles
Image
Replica 1070 R90/S (based on 82 RT)
1975 R90/6
ME 109
Posts: 7307
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Clutch adjustment

Post by ME 109 »

Now I'm just going to have to have a look at my 203mm crutch measutrement! Not that one!, my eight and 1/64th" measurement.
My RS now has an adjustable linkage on the gear shift, and a new pivot bolt and bush. Ooooooooh, been dreaming of that for a while. Much mo precise changes.
Lord of the Bings
chasbmw
Posts: 765
Joined: Fri Aug 06, 2010 7:40 am
Location: Bath UK

Re: Clutch adjustment

Post by chasbmw »

I found a link to a copy of the /6 riders handbook, with instructions on how to adjust the clutch

http://www.pbase.com/dwerbil/image/74356104

Charles
Charles
Image
Replica 1070 R90/S (based on 82 RT)
1975 R90/6
User avatar
Manfred
Posts: 251
Joined: Fri Nov 19, 2010 10:49 am
Location: on a mountain near Gowen, OK; on a 1987 R80RT
Contact:

Re: Clutch adjustment

Post by Manfred »

Would that same procedure, from the /6 handbook, apply to newer airheads - say an '87 R80RT?
There is therefore now no condemnation to them which are in Christ Jesus. (Romans 8:1)
chasbmw
Posts: 765
Joined: Fri Aug 06, 2010 7:40 am
Location: Bath UK

Re: Clutch adjustment

Post by chasbmw »

Manfred,

No,

That is the old procedure which for all airheads has been superseede by the 201-203mm procedure.

IMHO etc etc
Charles
Image
Replica 1070 R90/S (based on 82 RT)
1975 R90/6
User avatar
Manfred
Posts: 251
Joined: Fri Nov 19, 2010 10:49 am
Location: on a mountain near Gowen, OK; on a 1987 R80RT
Contact:

Re: Clutch adjustment

Post by Manfred »

Very good. I shall study the 201-203mm procedure.
There is therefore now no condemnation to them which are in Christ Jesus. (Romans 8:1)
guy
Posts: 39
Joined: Tue Aug 10, 2010 3:01 pm

Re: Clutch adjustment

Post by guy »

is that also for right side clutch arms?
Deleted User 72

Re: Clutch adjustment

Post by Deleted User 72 »

guy wrote:is that also for right side clutch arms?
That picture is of the bottom, so it is (embarrasingly) showing the right side clutch option.
Post Reply