Boxerworks R80G/S brake conversion

Discuss all things 1970 & later Airheads right here.
Post Reply
Woodgrain
Posts: 7
Joined: Thu Feb 03, 2011 7:37 pm

Boxerworks R80G/S brake conversion

Post by Woodgrain »

I bought one of Nathans' brake conversion brackets for my '83G/S which uses a modern oilhead twin-piston caliper, but I'm not sure which one.Any ideas on which one fits?

Woodgrain
Top
User avatar
StephenB
Posts: 326
Joined: Tue Aug 03, 2010 2:39 pm
Location: Ontario Canada
Contact:
Contact StephenB

Re: Boxerworks R80G/S brake conversion

Post by StephenB »

The Oilhead calipers are 4-piston calipers and they are all the same AFAIK. I used one from a 2000 K1200S on a 1990 GS. If that is the one you're planning to use I am pretty sure you'll need a right one for your G/S conversion. Nathan will know for sure.

Image
Some of the above is fact, some is fiction, some is my personal imagination and some is just simple truth. [me]
http://www.stephenbottcher.net
Top
Post Reply

Return to “Post 1970 Airheads”