r75/6 wheel bearings

[mefrank11]

Sorry if this is old info but I thought I,d try to share this. I replaced mt front and rear wheel bearings with timken 30203 92 ka1 from a company in tampa for around $75.00 delivered for all four sets. Set being race and bearing according to saleman Frank in valrico fl

[Deleted User 61]

I moved this from "Topics" to "Forum" (I'm not sure what, exactly, that Topics section is for...) so it would get noticed more, and the "bump" is gratis!

[Duane Ausherman]

I hope that you set the preload correctly, or you may ruin your hub.

[mefrank11]

I hope that you set the preload correctly, or you may ruin your hub.

I hope i set it correctly as well . I dont understand the posts on preload. Seems like you,d have to have an advanced degree to comprehend the posts. Frank

[mefrank11]

I moved this from "Topics" to "Forum" (I'm not sure what, exactly, that Topics section is for...) so it would get noticed more, and the "bump" is gratis!

Thanks Rob hey I,m lucky I got it on here at all Frank in florida

[Duane Ausherman]

"I hope i set it correctly as well . I dont understand the posts on preload. Seems like you,d have to have an advanced degree to comprehend the posts. Frank"

Or, go to my website and read the article on this very subject. It would be a good start and see if that helps.

Everything that you could want to know is already written on the Internet somewhere. Read up every point of view and if questions persist, then come here and get contradictory answers

[Major Softie]

I dont understand the posts on preload. Seems like you,d have to have an advanced degree to comprehend the posts. Frank

If you read Duane's article, at least you wont feel that way anymore. It's just that people are talking in shorthand about a set of parts that you aren't familiar with. A little more education about how the bearing stack is put together and you'll understand all the posts.