Hello again, I'm back

Discuss all things 1970 & later Airheads right here.
User avatar
Ken in Oklahoma
Posts: 3182
Joined: Tue Aug 03, 2010 5:10 pm

Re: Hello again, I'm back

Post by Ken in Oklahoma »

That short wheel base sure looks funny to a guy who hasn't been around them very much. Sorta like somebody kicked the bike in the ass.

No offense intended. I need a short wheelbase /5!


Ken
____________________________________
There's no such thing as too many airheads
CVA-42
Posts: 389
Joined: Sat Aug 07, 2010 8:28 am

Re: Hello again, I'm back

Post by CVA-42 »

She LOOKS pretty straight from here despite the things you describe. A coupla non-stock small things but nothing major to my eye. How does she run? I like Benchmark Works and Hucky for parts. '71 was the only year for those DOT-mandated reflectors on the turn signal housings, I think. Pretty hard to find the correct ones anymore.
Deleted User 62

Re: Hello again, I'm back

Post by Deleted User 62 »

daz wrote: To start with, I need throttle cables. Any hints on where I can source 'other than' oem parts? Ground cable, fuel lines, grips, and both filters are next. Any chance of seat covers available?
http://www.eubmw.com sells some parts cheap with free shipping, for the rest try Hucky's http://www.bmwhucky.com/, he sells seat covers, too, and offers a discount depending on how you pay.
daz
Posts: 343
Joined: Wed Aug 04, 2010 4:07 pm
Location: Ohio

Re: Hello again, I'm back

Post by daz »

SteveD wrote:Motobins sell Venhill cables cheaper than oem, but having used them, I think oem is better value in the long run.
I'd go aftermarket for the other things you've mentioned, but good throttle cables go a long way to easier tuning I think.
Good afternoon Steve. I have not done business with Motobins for some time. I see their prices are still competetive. When you add shipping in there, is it still advisable to deal overseas? And thanks for the advice everyone.

I will check out those other two venders (who I forgot about). And the bike starts right up but runs poorly. I think one of the ferrels on the throttle cable was not seated properly so it was way out of sync. And with that dumb exhaust you can't tell. However, I really like the looks of that dumb exhaust!
1971 R50/5, 1980 R100T,
CRF 300 Rally, CRF 250F,
1947 James ML
Motorhead
Posts: 391
Joined: Mon Aug 09, 2010 8:30 pm

Re: Hello again, I'm back

Post by Motorhead »

daz wrote:Yes, the bike looks very nice in this picture. But you can't see the silver paint on the wheels covering rusted spokes and rim. Or the black rattle can paint under the seat and on the turn signal stanchions. Headlight and tank surface rust, scratches and dents. They did a good job on preparing the bike for sale.

But I really like it. Except for the exhaust it is original. To start with, I need throttle cables. They are frayed. Any hints on where I can source 'other than' oem parts? Ground cable, fuel lines, grips, and both filters are next. Any chance of seat covers available? The bike starts, stops, and runs. So I have a tentative smile on my face.


CAPTIAL CYCLE, HUCKEY'S, VICTOR, BOB'S BMW add a .com they are closer to you
richard t
Posts: 705
Joined: Tue Aug 03, 2010 10:35 pm
Location: Crescent Oklahoma USA

Re: Hello again, I'm back

Post by richard t »

I just bought some parts from Huckey's, I sent Hans a check and he sent the parts right back, pretty good service. note I put a set of /5 battery covers on LaDonna's /6, at her request, she likes the looks of them.
User avatar
Ken in Oklahoma
Posts: 3182
Joined: Tue Aug 03, 2010 5:10 pm

Re: Hello again, I'm back

Post by Ken in Oklahoma »

For BMW spares there is the local BMW dealer--for those few of us who actually live in range of a BMW dealer.

In Boise, Idaho one of the guys there speaks airhead. The dealer there stocks some rudimentary, often used parts like wheel bearings, carb diaphragms, valve cover gaskets, and such. The prices are list, but the good thing is that the dealer there can get the part in a week, and there are no shipping charges.

And once in Seattle I needed a set of steering head bearings. I was astonished that the dealer had them in stock. That bearing is unique, so there's no finding it at a bearing house. I bought two sets, one set to use, and one set to keep for when I will need them again.

As a side note, on the steering head bearings, if you call a bearing supplier and give him the bearing number in your maintenance manual, the supplier might find a bearing, but it costs something like two or three hundred dollars. I don't recall the details of the problem, but the bearing number I gave the dealer is the same in some way as a VERY large bearing for another purpose entirely.

Ken
____________________________________
There's no such thing as too many airheads
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Hello again, I'm back

Post by Major Softie »

daz wrote:Yes, the bike looks very nice in this picture. But you can't see the silver paint on the wheels covering rusted spokes and rim. Or the black rattle can paint under the seat and on the turn signal stanchions. Headlight and tank surface rust, scratches and dents. They did a good job on preparing the bike for sale.
Even in the posted picture I can see an awful lot of rust on everything that isn't chromed or painted, and that sidestand used to be painted once....
MS - out
daz
Posts: 343
Joined: Wed Aug 04, 2010 4:07 pm
Location: Ohio

Re: Hello again, I'm back

Post by daz »

Motorhead wrote:


CAPTIAL CYCLE, HUCKEY'S, VICTOR, BOB'S BMW add a .com they are closer to you
[/quote]

Good afternoon Motorhead. Following up on that "Victor" I get the most amazing sites from yoga to online betting. Do you have a better address for him?
Thanks,
Working on my shopping list. I'm only doing maintenance and fixing mechanical flaws so far. No $50 per each enamel gastank rondels. At least not yet?!
daz
1971 R50/5, 1980 R100T,
CRF 300 Rally, CRF 250F,
1947 James ML
Chuey
Posts: 7632
Joined: Mon Aug 02, 2010 11:56 pm

Re: Hello again, I'm back

Post by Chuey »

I bought a pretty big roll of fuel line from Hucky's. It rotted out on all the bikes I put it on. I like everything else he sells and he's fine to deal with. I just have switched to Gates Barricade fuel line in hopes it will last a long time.

Chuey
Post Reply