Shocker adjustment and YABBA-DABBA-DOO!!

Discuss all things 1970 & later Airheads right here.
Post Reply
User avatar
grant81rs
Posts: 744
Joined: Tue Aug 03, 2010 2:06 am
Location: Gippsland - Australia

Shocker adjustment and YABBA-DABBA-DOO!!

Post by grant81rs »

Gidday fellas,

Well with this lovely sunny Sunday afternoon slowly coming to an end and with me having worked nearly all the way thur my self instructed list of must do home chores for this weekend there was only one last job to do before the sun fades, and that was to replace two rather dead looking agave plants that had been beaten to dead by the cold winters forsty mornings and they were making the pool decking look a litte crap and we can't have that now since our hot Aussie summer days will be here before we know it, and one must have the poolside area looking the goods at all times..... :shock:

With the plant nursey all picked out and it being the furtherest one away I could think of without being to stupid about it ,a good 100km round trip sounds nice, I wheeled out the freshly washed and polished RS from the Oz boxerworks rally and thru on the panniers, called out to my son who keenly got all his gear on quickly while I grabbed my wallet and phone from the draw then kissed my wife goodbye, were off to get the plants, be back in a couple of hours babe..

Anyway this thread was meant to be about shockers so I better get to that bit......While riding on the Oz rally with steveD at one of the fuel stops steve mentioned that my bikes walla's and twists thru the corners a little to much....."It's always done that" was my reply and to tell you all the truth that is what I thought the handling characterists of an old beemer were, I've had the bike for 4 years and just got used to it, even two-up with my son on the back and all our camping gear the "olegirl" just wallowed thru and around all the corners like a big ole "rubber-cow"...End of story, sort of....

I was given the chance to ride SteveD's beautiful black RS on the rally ride for about 40 kms and I couldn't believe the difference in the handling, nice and firm and no wallowing at all and this became a topic of conversation for most of the weekend between the two of us, to the point of me trying to adjust my "Marcozzi" shockers mid-way to no avail due to the position of the pannier frame and also the fact that they had slightly siezed up a bit, shame on me for never ever adjusting them from the previous owner, they felt nice and comfy I guess.

So last weekend I took them both off the bike, cleaned them up and played around with the settings and got them working a treat again, before they were on the sofest setting for the two adjustments and the ride to the nursery today with my son on the back was the first time on the new setting, to what Steve told me to put them on and I cannot believe the difference to the bike, it feels like a new ride and handles just so much better.....

What was I thinking for not ever paying an attention to them before :oops:
Cheers, Grant
Gippsland - Australia

1978 R100RS
1981 R100RS
1994 K1100RS
2005 R1150gsa
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by ME 109 »

Great Grant!
You'll be scraping the paint off those valve covers next. :shock:
Lord of the Bings
She'llbe
Posts: 724
Joined: Tue Aug 03, 2010 6:48 pm

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by She'llbe »

I don't think so Jeff, that bike looks to nice to start scraping bits off.
From the desk of the
Mt. Nardi Yacht Club
PO BOX 95
Nimbin, NSW
Australia 2480
02-6689-1234
Chuey
Posts: 7632
Joined: Mon Aug 02, 2010 11:56 pm

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by Chuey »

That's cool that you were able to ride another bike and compare. How else would you know something was amiss?

Chuey
Armaguidon13
Posts: 94
Joined: Thu Aug 05, 2010 4:57 pm
Location: Aubagne France

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by Armaguidon13 »

I've find that the best settings for my 90S Konis are all at the softer
ME 109
Posts: 7306
Joined: Tue Aug 03, 2010 3:00 am
Location: Albury, Australia

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by ME 109 »

She'llbe wrote:I don't think so Jeff, that bike looks to nice to start scraping bits off.

Not even just a teeny bit?
Lord of the Bings
User avatar
SteveD
Posts: 4910
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Shocker adjustment and YABBA-DABBA-DOO!!

Post by SteveD »

Good stuff Grant.

Are they now easily adjustable, whilst on the bike, with the frames in situ?
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Post Reply