instrument loom plug

Discuss all things 1970 & later Airheads right here.
Post Reply
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

instrument loom plug

Post by 2valve »

Hi to all, l know somewhere on the forum its an excellent picture of the instrument plug and what each connector does
( and where they go to ?), but i cant find it :?: . could someone please tell me where it is /link :oops: ! bike is a 4/1975 r90. Thanks in advance
User avatar
Airbear
Posts: 2887
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: instrument loom plug

Post by Airbear »

Is this what you are thinking of, Gary?

Image

This is for the 1974 model and I'm not sure if it will suit the 1975. Somewhere along the way the order of the idiot lights changed, but I dunno when. You should be able to tell just by comparing this image with the back of your circuit 'board'.

If you think it will be useful I have a high res PDF I can send. Shoot me an email or a PM with your email address and I'll attach it to a return email.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: instrument loom plug

Post by 2valve »

Hi Charlie, yes that would be of great help thank you. e-mail address as follows : 2valve@mail.com
chasbmw
Posts: 765
Joined: Fri Aug 06, 2010 7:40 am
Location: Bath UK

Re: instrument loom plug

Post by chasbmw »

That looks to be the same setup as on my June 1975
Charles
Image
Replica 1070 R90/S (based on 82 RT)
1975 R90/6
User avatar
Airbear
Posts: 2887
Joined: Tue Aug 03, 2010 10:02 am
Location: Oz, lower right hand side, in a bit, just over the lumpy part.

Re: instrument loom plug

Post by Airbear »

chasbmw wrote:That looks to be the same setup as on my June 1975
Ah, good to know. Thanks Charles

Gary, the PDF is winging its way northward.
Charlie
and Brunhilde - 1974 R90/6
Image

Graduate, Wallace and Gromit School of Engineering and Design (Pending)
2valve
Posts: 233
Joined: Wed Aug 11, 2010 10:00 am
Location: Glen Innes Australia

Re: instrument loom plug

Post by 2valve »

Hi Charlie, Thank's very much for that.
Post Reply