bbelk wrote:*saucey tool pix*
You get 10/10 for that post bbelk!Tool porn
Re: Tool porn
You get 10/10 for that post bbelk!Cheers, Steve
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
Victoria, S.E.Oz.
1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
-
Deleted User 287
Re: Tool porn
Sorry Brad - only 9/10 from me....... no 10x12mm ring spanner!SteveD wrote:bbelk wrote:*saucey tool pix*
Re: Tool porn
look close at the ones facing fore/aft that clamp the two halves of the brace together.ME 109 wrote:Oe fork brace on my RS has normal allens.PITAPan wrote:
Look at the allens on your fork brace. (the black telefix copy thing). Piloted allens.
'course they might have seen you coming like they did with the bearings and sold you a defective RS
Re: Tool porn
Anything is possible, except my fork brace being two piece. My fork brace is a pressed job. Twin shock.PITAPan wrote:look close at the ones facing fore/aft that clamp the two halves of the brace together.ME 109 wrote:Oe fork brace on my RS has normal allens.PITAPan wrote:
Look at the allens on your fork brace. (the black telefix copy thing). Piloted allens.
'course they might have seen you coming like they did with the bearings and sold you a defective RS
You know, the nice 81-84 years. Like yours.
Lord of the Bings
Re: Tool porn
I'll see if I can post some pictures of my tool(s).
Chuey
Chuey
Re: Tool porn
Hmmmm...ME 109 wrote:Anything is possible, except my fork brace being two piece. My fork brace is a pressed job. Twin shock.PITAPan wrote:look close at the ones facing fore/aft that clamp the two halves of the brace together.ME 109 wrote:Oe fork brace on my RS has normal allens.PITAPan wrote:
Look at the allens on your fork brace. (the black telefix copy thing). Piloted allens.
'course they might have seen you coming like they did with the bearings and sold you a defective RS
You know, the nice 81-84 years. Like yours.
Well I have two of the fork braces that go OVER the fender and connect the lower legs. Both look like Telefix braces and they have cast into the underside "BMW, made in W. Germany". But no BMW logo and no Telefix stickers. Telefix is a German company. I thought the ones I have were stock, but I see RSs lacking them.
Re: Tool porn
Ah, the old chuck wagon hoop braces (as I call them)PITAPan wrote: Well I have two of the fork braces that go OVER the fender and connect the lower legs.
Well, they look like a chuck wagon's canvas cover hoops. (after the Indians burnt the canvas off 'em) (before John (Marrion) Wayne shot 'em.
Nothing like hijacking yer own thread.
Get those bikes in a circle pilgrims!
Lord of the Bings
Re: Tool porn
No. Not those. You could look up "Telefix Fork Brace". I was just looking through the Telefix PDF catalog. lot of interesting stuff, mostly shop lifts and whatnot, but also the fork braces and clip on bars.ME 109 wrote:Ah, the old chuck wagon hoop braces (as I call them)PITAPan wrote: Well I have two of the fork braces that go OVER the fender and connect the lower legs.
Well, they look like a chuck wagon's canvas cover hoops. (after the Indians burnt the canvas off 'em) (before John (Marrion) Wayne shot 'em.
Nothing like hijacking yer own thread.
Get those bikes in a circle pilgrims!
-
Major Softie
- Posts: 8900
- Joined: Tue Aug 03, 2010 1:46 pm
Re: Tool porn
Yeah, I had a Telefix on my 82 750 GPZ a hundred years ago (don't bother trying to do the math). They're a really nice product. Best self-aligning fork brace I've seen. Nothing like the big hoops.
MS - out
-
Zombie Master
- Posts: 8821
- Joined: Sun Aug 22, 2010 12:21 am
- Location: Vancouver Island BC Canada
Re: Tool porn
Rob....with an post like that, you definitely need to be riding an Airhead.justoneoftheguys wrote:Sorry Brad - only 9/10 from me....... no 10x12mm ring spanner!SteveD wrote:bbelk wrote:*saucey tool pix*
Any and all disclaimers may apply