converting snowflakes

timkil · Post by **timkil** » Tue Sep 30, 2014 2:21 pm

Hello all, I'm going to convert snowflake rims on my '83 r80 to tubeless. I measured my tube stems at a hair less than .30". Bike Bandit has stems for a .30" hole. Anyone out there have any experience with these Drag Specialties stems?

Kurt in S.A. · Post by **Kurt in S.A.** » Tue Sep 30, 2014 3:55 pm

What about item #5:

http://www.realoem.com/bmw/showparts.do ... fg=31&hl=6

Kurt in S.A.

ME 109 · Post by **ME 109** » Tue Sep 30, 2014 3:58 pm

I found rubber tubeless valves to leak. Not saying they all will.
I've had better luck with the metal bodies jobs. Last one I had was right angled, made tyre pumping so much easier.

It wont hurt to open your valve hole fractionally.

Zombie Master · Post by **Zombie Master** » Fri Oct 03, 2014 6:23 pm

ME 109 wrote: It wont hurt to open your valve hole fractionally.

Major Softie · Post by **Major Softie** » Fri Oct 03, 2014 9:40 pm

Zombie Master wrote:
ME 109 wrote: It wont hurt to open your valve hole fractionally.

Lube is always important, of course.

timkil · Post by **timkil** » Sat Oct 04, 2014 2:48 pm

Let's just leave my valve hole out of this, lubed or unlubed.

Rob · Post by **Rob** » Sat Oct 04, 2014 3:06 pm

Hopefully vanzen will reply to this. He is your go-to guy on this.

timkil · Post by **timkil** » Mon Oct 06, 2014 5:10 pm

Vanzen, if you're out there, chime in.

Boxerworks.com

converting snowflakes

converting snowflakes

Re: converting snowflakes

Re: converting snowflakes

Re: converting snowflakes

Re: converting snowflakes

Re: converting snowflakes

Re: converting snowflakes

Re: converting snowflakes