Page 2 of 2
Re: Clutch Switch Spade Connectors
Posted: Sat Jan 31, 2015 11:06 am
by jagarra
Crunch, it would be more accurate by measuring the male part of the connection. Since you only need a few, drop me a line with the size , your address and I will send you some
gg
Re: Clutch Switch Spade Connectors
Posted: Fri Feb 06, 2015 9:19 am
by montmil
Are not these female terminals the ones that crimp the wire at a 90-degree angle from the male spade? I'd like to find some myownself.
I just recently used some proper width, straight terminals to the clutch switch but had to bend the crimped portion to clear the lever perch. Not the tidiest looking job but some shrink tubing helped. This on a 1978 R100/7.
Monte
Re: Clutch Switch Spade Connectors
Posted: Sat Feb 07, 2015 5:56 pm
by Crunch
Mongo, in an ideal world the answer is yes, the OEM are 90 degree female spade connectors. But the straight type can be made to work as you have discovered. I believe the heat shrink tubing is critical.
Jagarra, I'll send you a PM.
Thanks to all who responded to me. -Crunch
Re: Clutch Switch Spade Connectors
Posted: Fri Feb 13, 2015 8:08 am
by Crunch
Many thanks to Jaggar for the spade connectors. Let me know if I can ever return a favor. -Mike