Boxerworks.com

anyone know a source for the shift lever rubber part? Mine has finally cracked off.

They are readily available at a BMW Moto dealer or order one from a BMW car dealer in your local area. Otherwise go on to Max BMW Fiche or MotoBins and order one. Not too expensive.

For one, try here....
http://www.maxbmwmotorcycles.com/fiche/fiche.aspx

I've found replacements brittle and likely to split way before their time.

Any alternatives out there?

Do what I do - buy 2, keep one as a spare, and the first one will last forever, you will never need the spare until you lose it or toss it

SteveD wrote:I've found replacements brittle and likely to split way before their time.
Any alternatives out there?

Appropriate size automotive heater hose.

dougie wrote:Appropriate size automotive heater hose.

I was gunna suggest 55 wraps of electrical tape (25mm) but I like Doug's idea better!

ME 109 wrote:

dougie wrote:Appropriate size automotive heater hose.

I was gunna suggest 55 wraps of electrical tape (25mm) but I like Doug's idea better!

You only need about 1 inch.
It's cheap - buy a 1 foot piece and use the rest for smacking locusts

dougie wrote: You only need about 1 inch.
It's cheap - buy a 1 foot piece and use the rest for smacking locusts

Whoa, I had to go and get my glasses. I thought you said 'smoking'

ME 109 wrote:

dougie wrote: You only need about 1 inch.
It's cheap - buy a 1 foot piece and use the rest for smacking locusts

Whoa, I had to go and get my glasses. I thought you said 'smoking'

Now there's a thought, I mean, you never know....