Boxerworks.com

This was in a twin-shock airhead toolkit I just picked up, and I have no ideas what it does:



It's around 38mm overall length, M6 thread and has a 10mm head on it.

Looks like one of the retainers for the back of a gauge to me, the kind that hold aftermarket oil temp gauges and such.

Oil cooler thermostat opening tool.

robert wrote:Oil cooler thermostat opening tool.

Thank you.

As I don't have an oil cooler equipped motorcycle this is of no use to me. Anybody wants it for free drop me a pm.

Holds the Left Handed Spindley Sprocket in place. Must be replaced imeaditly as there is no telling what might happen if your Left Handed Spindley Sprocket falls off.

Garnet wrote:Holds the Left Handed Spindley Sprocket in place. Must be replaced imeaditly as there is no telling what might happen if your Left Handed Spindley Sprocket falls off.

All UK spec. bikes had the Left Hand Spindley Sprocket welded onto the shaft...

If the threaded part is 23mm long it is the thermostat opener tool.

DanielMc wrote:

robert wrote:Oil cooler thermostat opening tool.

Thank you.

As I don't have an oil cooler equipped motorcycle this is of no use to me. Anybody wants it for free drop me a pm.

Bummer, you're across the pond.

Jeff in W.C. wrote:

DanielMc wrote:

robert wrote:Oil cooler thermostat opening tool.

Thank you.

As I don't have an oil cooler equipped motorcycle this is of no use to me. Anybody wants it for free drop me a pm.

Bummer, you're across the pond.

No worries - happy to stick a stamp on an envelope for anyone here on the forum whatever their location.

Thanks Daniel,
The tool arrived today. Pretty cool getting something from half way around the world.

Thanks again.

I owe you one.