Boxerworks.com

Evening Gents, As per Robs request here is the schematic for the mod re hazards. its from the Haynes Electrical tech manual. Hazard option.PNG Rob did you manage to find that 3 pin relay mod info , i agree about lack of UK suppliers these days for electronic bits , Maplins is a miss , RS components ...

Hi Gents , I've seen a similar mod using two 30v 5a diodes and a switch to create a hazard flash option on systems without that facility. That takes it's power from the lamp side of the flasher relay with a switch inline then it links to the RH indicators side via a diode 30v 5A and same for LH side...

I dont claim to be an expert on these boxes but having just rebuilt mine i think you will be very lucky to get the endcover off without some tool to pull the output shaft flange off its taper , you could be one of the lucky ones who find the taper is not super tight to remove . You can make up somet...

Thanks for that fix , cant see why it would not work. changing the subject slightly but sticking with diodes , i came across this fix in the headlamp shell to bypass the diode on the fuse/connector board in headlamp should the diode on the board go , you can see that a jumper cable has been made up ...

Thanks Rob ,
Can I take you up on that offer of how to do the modification please.
In the interim I will dig up a wiring diagram , I think there is a link to one on Snowbums web site .
Thanks both I'll let you know if I find anything .
Cheers Kev

Hi folks, I have a issue with the indicator warning light on the instrument panel being constantly on but not flashing once the ignition is turned on nor does it repeat when the indicator switch is moved to right or left hand indicator position just a steady green light. I had just replaced the orig...

Thanks for input , yes will be visiting Moto Bins for a new selector pawl, they are around £36 or
Might try Motoworks for a used cassette of the 1982 version with the bigger spikes on the cam that is supposed to eliminate the false neutrals of the earlier shift cams.
decisions decisions!!

Hi , Well i have just opened up my gearbox its 1978 R80/7 , the intention was to replace the input shaft as the splined section for clutch plate is shot . But when i took the cover off i noticed some additional parts to the shift cassette , a couple of counter weights had been welded onto the select...