Today in the shed you did...

Discuss all things 1970 & later Airheads right here.
Duane Ausherman
Posts: 6008
Joined: Thu Aug 12, 2010 12:39 pm
Location: Galt California
Contact:

Re: Today in the shed you did...

Post by Duane Ausherman »

Drove over to Los Altos to help an old friend with his 1956 R69, the one that I restored back in 1973 and he got from me a few years later.

Today we removed the old Denfeld solo seat and put a new one on. Also installed the 200 watt 12 volt alternator system from Vech. The directions are far better than most and it goes on easily. We didn't have a battery, so couldn't test it out.

Fun day working with a dear friend on a mutual hobby and exchanging stories of life.
Ask the Indians what happens when you don't control immigration.
User avatar
SteveD
Posts: 4909
Joined: Tue Aug 03, 2010 3:29 am
Location: Melbourne, Oz.

Re: Today in the shed you did...

Post by SteveD »

Can't get much better than that Duane.
Cheers, Steve
Victoria, S.E.Oz.


1982 R100RSR100RS supergallery. https://boxerboy81.smugmug.com/R100RS
2006 K1200R.
1994 R1100GS.
User avatar
Ken in Oklahoma
Posts: 3182
Joined: Tue Aug 03, 2010 5:10 pm

Re: Today in the shed you did...

Post by Ken in Oklahoma »

SteveD wrote:Can't get much better than that Duane.
With the possible exception of sex with a gorgeous lady who adores you. (Could happen, not anytime soon, but it could.)

Ken, hope springing forever in Oklahoma
____________________________________
There's no such thing as too many airheads
User avatar
enigmaT120
Posts: 3570
Joined: Tue Aug 03, 2010 12:25 am
Location: Falls City, OR

Re: Today in the shed you did...

Post by enigmaT120 »

Major Softie wrote: If the light is an LED, you have to make sure you have to polarity right or it won't light. Make sure you try it both directions.
I learned that lesson after many tries to fit LED turn signals to my Triumph. The bulb in the vac machine had black and red wires going to it.

After I put the machine back together so my wife could give it to Goodwill, it now works. Not the light, but it does everything else it's supposed to. I guess I'll take credit for fixing it but I still don't know what was wrong.
Ed Miller
'81 R65
'70 Bonneville
Falls City, OR

"Gasoline makes people stupid." -- Chuey
"I'll believe corporations are people when the State of Texas executes one." Bumper sticker
Major Softie
Posts: 8900
Joined: Tue Aug 03, 2010 1:46 pm

Re: Today in the shed you did...

Post by Major Softie »

enigmaT120 wrote:After I put the machine back together so my wife could give it to Goodwill, it now works. Not the light, but it does everything else it's supposed to. I guess I'll take credit for fixing it but I still don't know what was wrong.
Well, I guess that beats knowing what was wrong but still failing to fix it. :mrgreen:
MS - out
Duane Ausherman
Posts: 6008
Joined: Thu Aug 12, 2010 12:39 pm
Location: Galt California
Contact:

Re: Today in the shed you did...

Post by Duane Ausherman »

SteveD wrote:Can't get much better than that Duane.
That was one aspect of a great day. The other was my new Ford Fusion Hybrid. It is rated at 40 mpg highway and 44 mpg city. I don't know how to get it to do so badly on mileage.

My "trip" was 220 miles and it used exactly 4 gallons of fuel. That is 55 mpg and it was 20% city and 80% highway. I don't trust the computer to tell the truth, so I am carefully documenting the computer "claim" and the actual fill up quantity. The computer said it was 55.9 mpg. That is an error of under 1% and I won't argue with that, as it is within a reasonable margin of error.

How is it possible for Ford to be so far off in it's claims? I would expect it to be "off" but in the other direction. Earlier I was also getting good results. Then I found that the fuel tank was hard to fill and a capacity of 13.6 gallons, not the 13 claimed. It is quite hard to fill and it has taken me quite a bit of time to learn how. However, not a single trip was even close to being near the "low" claimed mileage by Ford.

Should I ask for my money back?
Ask the Indians what happens when you don't control immigration.
User avatar
Steve in Golden
Posts: 3093
Joined: Tue Aug 03, 2010 4:30 pm
Location: Golden, CO USA

Re: Today in the shed you did...

Post by Steve in Golden »

No, you should ask them to remove the cheat software. They must be cheating to deliver such great MPG.
khittner1
Posts: 508
Joined: Thu Oct 04, 2012 8:46 am

Re: Today in the shed you did...

Post by khittner1 »

Hint for a happy life from "Deep Throat", somewhere in Wolfsburg: Don't measure your Fusion's NOx outputs . . .
User avatar
grant81rs
Posts: 744
Joined: Tue Aug 03, 2010 2:06 am
Location: Gippsland - Australia

Re: Today in the shed you did...

Post by grant81rs »

I found a spare part that I forgot I had brought, I buy shit, hide it then forget I even have it, then start looking again for that exact part on ebay or gumtree..... mad I say, I'm going f%$king mad..

Enjoy ya long Aussies weekend if ya like footy, but come center bounce time I might just start cleaning the pool..
Cheers, Grant
Gippsland - Australia

1978 R100RS
1981 R100RS
1994 K1100RS
2005 R1150gsa
Duane Ausherman
Posts: 6008
Joined: Thu Aug 12, 2010 12:39 pm
Location: Galt California
Contact:

Re: Today in the shed you did...

Post by Duane Ausherman »

grant81rs said, "I found a spare part that I forgot I had brought, I buy shit, hide it then forget I even have it, then start looking again for that exact part on ebay or gumtree..... mad I say, I'm going f%$king mad.."

How in the world can one do that? I would never do that. I never did that. Nope, not me, not even once. I have a system so that wouldn't happen. Only if I forgot my system could I do that. It would never happen, never did and won't.
Ask the Indians what happens when you don't control immigration.
Post Reply